Loading ...
Loading ...
Loading ...
Fig.35
u
Carry out action steps according to the illustration.
w
SuperFrost is deactivated.
w
Appliance continues to run in normal operation.
w
The appliance first cools to the set temperature.
Start defrost cycle
Use this function to start the automatic defrost cycle
manually if the defrost cycle does not start automati‐
cally in case of an error.
Starting the defrost cycle
Fig.36
Fig.37
u
Carry out action steps according to the illustration.
w
Defrost cycle has started: Symbol flashes until the
defrost cycle is automatically completed.
w
When the defrost cycle is completed: Appliance
continues to run in normal operation.
Canceling the defrost cycle
The defrost cycle is automatically completed. However,
you can also cancel the defrost cycle at any time
during the defrosting:
Fig.38
u
Carry out action steps according to the illustration.
w
Defrost cycle is canceled.
w
Appliance continues to run in normal operation.
PartyMode
This function activates and deactivates PartyMode.
PartyMode activates different functions that are useful
for a party.
PartyMode activates the following functions:
-
SuperCool
-
SuperFrost
-
IceMaker (see IceMaker *) and MaxIce
(see MaxIce*) *
You can set all listed functions individually and flexibly.
By deactivating PartyMode all changes are discarded.
If the function is active, the appliance operates at a
higher output. As a result, the operating noise of the
appliance may be temporarily louder, while energy
consumption increases.
Activating PartyMode
Make sure that the following requirements are
fulfilled:*
q
IceMaker has been started for the first time.
(see4.2 Starting the IceMaker for the first time*)
Fig. 39
Fig.40
u
Carry out action steps according to the illustration.
w
PartyMode and the corresponding functions are acti‐
vated.
w
The current temperature flashes until the target
temperature is reached.
Deactivating PartyMode
PartyMode is automatically deactivated after 24 hours.
However, you can also manually deactivate PartyMode
at any time:
Fig. 41
Fig. 42
u
Carry out action steps according to the illustration.
w
PartyMode is deactivated.
w
The appliance first cools to the set temperature: The
current temperature flashes until the target temper‐
ature is reached.
Use
16 * Depending on model and options
Loading ...
Loading ...
Loading ...