Loading ...
Loading ...
Loading ...
8.4.2 Drawer on glide rails
Removing drawer
Fig.96
u
Remove drawer as shown in the diagram.
Inserting drawer
Fig.97
u
Insert drawer as shown in the diagram.
8.4.3 Drawer on telescopic rails
The drawer runs on full-extension rails (telescopic
rails). There are full-extension telescopic rails and tele‐
scopic rails with partial pull-out. Drawers which are full
extension can be pulled out fully from the appliance.
Drawers with partial pull-out cannot be pulled out fully
from the appliance. The system in your appliance
depends on the type of appliance.
Full extension*
If you have full-extension rails, there is a clamp located
at the back on the left and right of the rail.
Removing drawer
Fig.98
u
Pull out drawer as far as it will go.
u
Lift left clamp and simultaneously pull drawer
forwards on the left. Fig.98(1)
u
Lift right clamp and simultaneously pull drawer
forwards on the right. Fig.98(2)
u
Remove drawer to the front. Fig.98(3)
u
Slide rails in.
Inserting drawer
Fig.99
u
Slide rails in.
u
Place drawer on rails.
u
Slide in drawer to the back.
w
Drawer latches in audibly at the back.
Partial pull-out fridge compartment*
Removing drawer
Fig. 100
u
Pull out the drawer halfway. Fig. 100(1)
u
Press down the drawer on the front. Fig. 100(2)
u
Push in the left rail approximately 2 cm (13/16 in).
Fig. 100(3)
u
Push in the right rail approximately 2 cm (13/16 in).
Fig. 100(4)
u
Remove drawer to the front. Fig. 100(5)
Fig. 101
If the rails are not yet fully pushed in after removing
the drawer:
u
Push the rails in completely.
Inserting drawer
Fig. 102
u
Slide rails in.
u
Place drawer on rails.
u
Slide in drawer to the back.
Equipment
26 * Depending on model and options
Loading ...
Loading ...
Loading ...