Elica ENF436BL 36 Inch Induction Cooktop

Use, care, and installation guide - Page 14

For ENF436BL. Also, The document are for others Elica models: ENF430BL

PDF File Manual, 60 pages, Read Online | Download pdf file

ENF436BL photo
Loading ...
Loading ...
Loading ...
14
Pause
The Pause function allows to suspend any function active
on the hob, bringing the cooking power to zero.
Activation:
- press
- a “ “ is displayed.
To deactivate the function:
Note: this operation restores the hob settings to those prior
to the pause.
- press
- within 10 seconds scroll to the right along the
Selection bar, relating to the cooking zone 2
Note: if the operation is not performed within this time the
pause function will remain active.
Note: if after 10 minutes, the Pause Function is not deactiva-
ted, the hob will turn o automatically.
Recall
The Recall function allows to recover all the hob settings, in
case of accidental shut-down.
Activation:
- turn the hob back on within 6 seconds after shutdown
- press within the next 6 seconds
Automatic heat up
The Automatic Heat UP function allows to reach the set
power faster; with this function it is possible to cook food
faster, but without the risk of burning it, because the tempe-
rature does not exceed the set level.
This function is available for the levels of power 1-8.
Activation:
• press and hold, on the Selection bar, the desired power.
• a “ “ is displayed.
The extraction system can be used in two versions: exter-
nal extraction and evacuation or as a filter (not included)
with internal recirculation.
EXTRACTION VERSION
• The fumes are evacuated towards the outside through a
series of pipes (bought separately) fastened to the su-
pplied connecting flange.
• The diameter of the exhaust pipe must be equivalent to
the diameter of the connecting ring:
- for rectangular outlets 10”x 3 1/4” (25.4 cm x 8.3 cm)
- for circular outlets Ø 6” (15.2 cm)
• Connect the product to wall-mounted exhaust pipes and
holes with a diameter equivalent to the air outlet (connec-
ting flange).
• Using wall-mounted exhaust pipes and holes with a sma-
ller diameter may reduce the eciency of extraction and
drastically increase noise levels.
• All responsibility in this regard is therefore denied.
• Use ducting with the minimal indispensable length.
• Use ducting with the least possible number of curves
(maximum angle: 90°).
• Avoid drastic changes in the ducting diameter.
Power-on
Press (touch) ON/OFF(1) hob/ extractor
The indicator light will turn on to indicate that the
hob/extractor is ready for use
Press again to turn o
Note: This function has priority over the others.
Switching on the extractor fan
Touch (press) the Selection bar to activate the extractor fan.
Extraction speed (power)
Touch and scroll along the Selection bar:
to the right to increase the speed (power) of the extractor
fan (0-4); to the left to decrease the speed (power) of the
extractor fan (4-0).
Timer
Activation/Regulation of Timer function for the extractor
fan
- Select the extractor fan (speed ¹ 0).
- Press
to access the Timer function (from any speed).
- Regulate the duration of the Timer:
press the selector , to increase the automatic shut-down
time
press the selector , to decrease the automatic shut-down
time the display will show the countdown,
Note: on the side of the display of the extractor fan, with
the Timer in use, the following symbol will appear . When
the timer has finished the countdown, there is an acoustic
signal (for 2 minutes, or it will stop when one of the buttons
on the hob is pressed), while the display will flash, with the
symbol “ “.
To switch o the timer:
- select the cooking zone
- set the value of the timer to “ “ , by means of
Note: the function remains active if no other key is pressed
in the meantime.
Automatic mode
The hood will turn on at the most suitable speed, adapting-
the extraction capacity to the maximum cooking level used
in the cooking zone.
Once the hob is turned o, the hood adapts its aspiration
speed, gradually decreasing it, so as to eliminate residual
vapours and odours
To activate this function:
Briefly press , the LED “
(A)
“ will light up to indicate that
the hood is working in this mode.
CFM reduction
Functionality included, configuration by the technician with
support of the service manual.
USE OF THE EXTRACTOR FAN
Loading ...
Loading ...
Loading ...