Loading ...
Loading ...
Loading ...
ASSEMBLY
5. With Table saw still in Lower Packing Tray, attach Stand
Handle
PC2
to Tubular Base of Saw with (2) M8 x 35mm
Carriage Screw
HP5
and (2) M8 Locknut
HP3
. Secure using
the 13mm Combination Wrench. See Figure 6.
NOTE: Square and round holes can be aligned together.
Figure 6
Figure 7
Figure 8
PC2
6. Attach Leg Assembly (assembled in Step 3) to the Upper
Stand Support (pre-attached to Saw). Insert M8 Plastic
Spacer
HP2
between Legs and secure with M8 x 75mm
Carriage Screw
HP4
and M8 Locknut
HP3
. Secure using the
13mm Combination Wrench. See Figure 7.
7. Install the Wheel Assembly (assembled in Step 1) to Upper
Stand Assembly (assembled in Step 4). Insert M8 Plastic
Spacer
HP2
between Legs and secure with M8 x 75mm
Carriage Screw
HP4
and M8 Locknut
HP3
. Secure using the
13mm Combination Wrench. See Figure 8.
HP3
HP3
HP2
HP2
HP3
HP5
HP4
HP4
8. Raise the Wheel Assembly section of the Stand to help
align the holes with the Leg Assembly (attached in Step 6).
Insert M8 Plastic Spacer
HP2
between Legs and secure with
M8 x 75mm Carriage Screw
HP4
and M8 Locknut
HP3
.
Secure using the 13mm Combination Wrench. See Figure
9.
NOTE: DO NOT over-tighten. Cut zip tie securing Pedal.
Figure 9
HP3
HP5
HP4
15
Loading ...
Loading ...
Loading ...