Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_155 | REV. D | EN09/23/2022Page 58 of 66
P#829867
SERVICING, REPLACING COMPONENTS & ADJUSTMENTS
SERVICING & REPLACING
COMPONENTS
NOTE: ANY CABINET ADJUSTMENTS ARE TO
BE MADE AFTER THE CABINET HAS BEEN
VERIFIED LEVEL AND PROPERLY SUPPORTED.
• Replace component parts with original equipment
manufacturer (OEM) components.
• Contact the dealer or our parts department at
844-849-6179 or TrueResidentialParts@truemfg.com
for replacement parts.
• Have a licensed service provider service your unit
to minimize the risk of possible ignition due to
incorrect parts or improper service and to ensure
the operator’s health and safety.
• Unplug the ice machine before cleaning or making
any repairs. Powering off an electronic control may
not remove power from all components
(e.g., light circuits, perimeter heaters, and
evaporator fans).
REVERSING DOOR
The new TUI-15 models come with articulating, soft-
close hinges. The hinges can be installed on either the
left-hand or right-hand orientation.
To order additional spacers of NSF cover screw caps,
contact our parts department at 844-89-6226 or
TrueResidentialParts@TrueMfg.com.
REQUIRED TOOLS
Required tools include (but may not be limited to) the
following:
• 1/8" Hex Head Allen Wrench
• Putty Knife (if NSF cover present)
PROCEDURE
NOTE: Figures show converting a right-hinged door to a
left-hinged door.
1. Loosen the hinge bolts and remove the door.
See fig. 1.
2. If NSF Cover is present, carefully pry screw caps
from the cover to access the door bracket screws.
See fig. 2.
3. If present, remove the door skin. See fig. 3.
4. Remove the existing spacer. See fig. 3.
5. Remove the hinge assemblies from the door
assembly. See fig. 4.
6. Shift the door brackets to the opposite side.
See fig. 5.
7. Install the bottom hinge at the top and the top
hinge on the bottom. See figs. 6 and 7.
8. Install the door skin. If present, reinstall the NSF
cover screw caps.
9. Move the remaining door hardware to the opposite
sides. See fig. 8.
10. Install the reversed door. Be sure to fully tighten
the hinge screws.
NOTE: BE SURE TO INSTALL THE CORRECT
SPACER FOR YOUR DOOR ORIENTATION.
11. Verify the door closes correctly and the gasket
seals without gaps. Adjust the door as needed. See
"Door Adjustment" (page 61).
Loading ...
Loading ...
Loading ...