Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_155 | REV. D | EN09/23/2022Page 36 of 66
P#829867
CABINET OPERATION
BEFORE OPERATING
To ensure ice quality, please clean and sanitize this
machine prior to first use. See “Descaling & Sanitizing”
(page 49). To ensure proper operation, follow the
installation checklist at the front of this manual.
NOTE: COSTS ASSOCIATED WITH
ADJUSTMENTS, CLEANING AND SANITIZING
PROCEDURES IN THIS GUIDE ARE NOT
COVERED BY THE WARRANTY.
WARNING! DO NOT USE THE ICE
MACHINE TO STORE ANYTHING
OTHER THAN ICE.
WARNING! DO NOT OPERATE EQUIPMENT THAT
HAS BEEN MISUSED, NEGLECTED, DAMAGED,
ALTERED OR MODIFIED IN ANY WAY.
BREAKER RESET
The breaker switch is located behind the kickplate
(see fig. 1). If the unit trips, press the breaker to reset
the switch.
FIG. 1.
Breaker switch location.
POWER SEQUENCE
• Press the power button once to begin ice
making operation. Press the button a second time
to turn the ice machine off.
• When unit is plugged in, the control board goes
through a sequence of checks to verify all sensors
are working properly.
• The drain system is energized when power is
supplied to the unit. It automatically turns on when
it senses water in the drain tube.
• Display will show oFF until the power button is
pressed.
• If the unit powers the drain pump but the drain remains
clogged for five minutes, the display will show drn and
cut power to the unit.
• If unit is too cold / too hot, or if the temperature probe is
unplugged / failed, the unit shuts down and displays an
error message.
Loading ...
Loading ...
Loading ...