Loading ...
Loading ...
Loading ...
14
Use a tool, such as a small
screwdriver, to pry out the axle and
take out the wheel.
C3
Omni-Directional Wheel
The omni-directional wheel bracket cannot be removed.
Note:
C3-1—
*
Clean as required.
Rinse the wheel and the axle with
water to remove any hair and dirt.
Dry and reattach the wheel, pressing
it firmly in place.
C3-2—
Open the top cover of the robot and
take out the dustbin.
Open the dustbin cover and remove
the filter, then empty the dustbin.
Fill the dustbin with clean water and
close the cover. Gently shake the
dustbin, and then pour out the dirty
water.
Leave the dustbin and the washable
filter to dry.
Clean the main wheels with a soft, dry cloth.
C4
Main Wheels
C5
Dustbin
*
Clean monthly.
C5-2—
C5-1—
*
Clean as required.
Note:
To prevent blockage, only use clean water without any
cleaning liquid.
C5-3—
C5-4—
Purchase an additional filter and alternate if necessary.
Rinse the filter repeatedly and tap it
to remove as much dirt as possible.
Allow 24 hours for the filter to dry
thoroughly and reinstall it.
Note: Do not touch the surface of the filter with your hands,
brush, or hard objects to avoid potential damage.
Note:
C6-3—
C6-2—
Open the water tank and fill it with
clean water.
Close the water tank and shake it
gently.
Pour out the remaining water as
shown.
Remove the VibraRise mop cloth from
the VibraRise mop bracket. Clean the
VibraRise mop cloth and air-dry it.
C7-1—
*
Clean as required.
C8-1—
*
Clean after each use and replace every 3-6 months.
Note: A dirty VibraRise mop will affect the mopping
performance. Clean it before use.
Use a soft, dry cloth to wipe and clean all
sensors, including:
Use a soft dry cloth to wipe the charging
contacts on the robot and the dock.
C7-2—
C7-3—
Note: If the robot will be left unused for a long period, turn it
off and charge it at least every three months to avoid battery
damage caused by over-discharge.
Battery
The robot is equipped with a built-in
high-performance lithium-ion rechargeable
battery pack. To maintain battery
performance, keep the robot charged
during normal use.
Remove the water tanks and the dustbin
before moving the dock. Grip the handle on
the back with one hand and the inner side
of the front, as shown. Do not grip the base
because as it is not designed for lifting.
Open the filter cover and remove the
filter.
C6
Washable Filter
C9
Robot Sensors
C10
Charging Contact Areas
C11
Moving the Dock
C7
Water Tank
C8
VibraRise Mop Cloth
*
Clean every 2 weeks and replace every 6-12 months.
*
Clean monthly.
*
Clean monthly.
C6-1—
ReactiveAI Obstacle Recognition
Wall Sensor
Mop Wash Sensor
Carpet Sensor
Cliff Sensors
C9-1—
C9-2—
C9-3—
C9-4—
C9-5—
Loading ...
Loading ...
Loading ...