Hikvision DS-K1A802AMF-B User Manual

Loading ...

Note

●

The displayed parameters may vary for dierent access control devices. There are part of

parameters listed as follows. Refer to the user manual of the device for more details.

●

Some of the following parameters are not listed in the Basic Informaon page, click More to

edit the parameters.

Name

Edit the card reader name as desired.

Minimum Card Swiping Interval

If the interval between card swiping of the same card is less than the set value, the card

swiping is invalid. You can set it as 0 to 255.

Alarm of Max. Failed Aempts

Enable to report alarm when the card reading aempts reach the set value.

Max. Times of Card Failure

Set the max. failure aempts of reading card.

Card Reader Type/Card Reader Descripon

Get card reader type and descripon. They are read-only.

Default Authencaon Mode

View the default card reader authencaon mode.

Fingerprint Capacity

View the maximum number of available ngerprints.

Exisng Fingerprint Number

View the number of existed ngerprints in the device.

Click Advanced and you can congure more parameters.

Enable Card Reader

Enable the funcon and you can operate the funcons below on the card reader.

Buzzer Polarity

Set Buzzer Polarity of main board according to the card reader parameters. Generally, adopts

the default sengs.

Max. Interval When Entering PWD

When you inpung the password on the card reader, if the interval between pressing two

digits is larger than the set value, the digits you pressed before will be cleared automacally.

Fingerprint Recognion Level

Select the ngerprint recognion level from the drop-down list.

Fingerprint Recognion Interval

Select the ngerprint recognion interval from the drop-down list.

Click OK.

DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual

Loading ...

Hikvision DS-K1A802AMF-B K1A802 Pro Series Fingerprint Time Attendance Terminal