Hikvision DS-K1A802AMF-B User Manual

Loading ...

In the Credenal → Fingerprint panel, click +.

In the pop-up window, select the collecon mode as Local.

Select the model of the connected ngerprint recorder.

Note

If the ngerprint recorder is DS-K1F800-F, you can click Sengs to select the COM the

ngerprint recorder connects to.

Collect the ngerprint.

1) Click Start.

2) Place and li your ngerprint on the ngerprint recorder to collect the ngerprint.

3) Click Add to save the recorded ngerprint.

Conrm to add the person.

Click Add to add the person and close the Add Person window.

Click Add and New to add the person and connue to add other persons.

Note

Once the ngerprint is added, the ngerprint type cannot be changed.

6.2.5 Collect Fingerprint via Access Control Device

When adding person, you can collect ngerprint informaon via the access control device's

ngerprint module. The ngerprints recorded can be used as credenals of the persons to access

the authorized doors.

Before You Start

Make sure ngerprint collecon is supported by the access control device.

Steps

Enter Person module.

Select an organizaon in the organizaon list to add the person and click Add.

Note

Enter the person's basic informaon rst. For details about conguring person's basic

informaon, refer to Congure Basic Informaon .

In the Credenal → Fingerprint panel, click +.

In the pop-up window, select the collecon mode as Remote.

Select an access control device which supports ngerprint recognion funcon from the drop-

down list.

Collect the ngerprint.

1) Click Start.

2) Place and li your ngerprint on the ngerprint scanner of the selected access control device

to collect the ngerprint.

3) Click Add to save the recorded ngerprint.

DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual

Loading ...

Hikvision DS-K1A802AMF-B K1A802 Pro Series Fingerprint Time Attendance Terminal