Hikvision DS-K1A802AMF-B User Manual

Loading ...

Overme Level for Workday

When you work for certain period aer end-work me on workday, you will reach dierent

overme level: overme level 1, overme level 2 and overme level 3 . You can set dierent

pay rate for three overme levels, respecvely.

Pay Rate

Set corresponding pay rates for three overme levels, which can be generally used to

calculate total work hours.

Overme Rule for Non-Workday

You can enable overme rule for non-workday and set calculaon mode.

Click Save.

Congure Aendance Check Point

You can set the card reader(s) of the access point as the aendance check point, so that the

authencaon on the card readers will be recorded for aendance .

Before You Start

You should add access control device before conguring aendance check point. For details, refer

to Add Device .

Steps

Note

By default, all card readers of the added access control devices are set as aendance checkpoint.

Enter the Time & Aendance module.

Click Aendance Sengs → Aendance Check Point to enter the Aendance Check Point

Sengs page.

Oponal: Set Set All Card Readers as Check Points switch to o.

Only the card readers in the list will be set as the aendance check points.

Check the desired card reader(s) in the device list as aendance check point(s).

Set check point funcon as Start/End-Work, Start-Work or End-Work.

Click Set as Check Point.

The congured aendance check point displays on the right list.

Congure Holiday

You can add the holiday during which the check-in or check-out will not be recorded.

DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual

Loading ...

Hikvision DS-K1A802AMF-B K1A802 Pro Series Fingerprint Time Attendance Terminal