Hikvision DS-K1A802AMF-B User Manual

Loading ...

Note

●

This funcon should be supported by the device.

●

You can log into the device to get the cercate le by web browser.

Check Synchronize Time to synchronize the device me with the PC running the client aer

adding the device to the client.

Oponal: Check Import to Group to create a group by the device name.

Finish adding the device.

Click Add to add the device and back to the device list page.

Click Add and New to save the sengs and connue to add other device.

10.

Perform the following operaons aer adding the devices.

Remote

Conguraon

Click

on Operaon column to set remote conguraon of the

corresponding device.

Note

●

For some models of devices, you can open its web window. To open

the original remote conguraon window, press Ctrl and click .

●

For detail operaon steps for the remote conguraon, see the user

manual of the device.

Device Status Click on Operaon column to view device status.

6.1.4 Add Device by EHome Account

For areas where devices using dynamic IP addresses instead of stac ones, you can add access

control device connected via EHome protocol by specifying the EHome account.

Before You Start

Set the network center parameter rst. For details, refer to Set Network Parameters .

Steps

Note

For the devices added by EHome don't support uploading events with captured pictures to the

client.

Enter Device Management module.

Oponal: Click on the right of Device Management and select Device.

The added devices are displayed in the list.

Click Add to open the Add window.

Select EHome as the adding mode.

Enter the required informaon.

Device Account

DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual

Loading ...

Hikvision DS-K1A802AMF-B K1A802 Pro Series Fingerprint Time Attendance Terminal