Loading ...
Loading ...
Loading ...
72 UTD1000L User Manual
Style
Classic,
Traditional,
Modern,
White&Black
To select display style
Menu Display
------
To set up waiting time before the manual turns off: 5s,
10s, 20s, Manual, Manual—the menu will not turn off
automatically, use OK to turn it on/ off.
System Info. ------ To display oscilloscope model, hardware version,
software version, etc;
6.11 Utility Setup
To set up the display interface for the Oscilloscope, do the following:
1. Press SHIFT, shift icon shows on upper right corner of the display;
2. Press UTILITY to access Utility menu.
Menu Setup shown as in the following table:
Table 6-18
Model UTD1000CL
Functional Menu
Settings Description
Self-Calibr. ------ The Oscilloscope will calibrate the system automatically.
Default ------ The Oscilloscope returns to factory default status.
Freq Counter On
Off
Turn on /off trigger frequency counter.
Clear ----- Clear saved or recorded waveforms or settings in the
Oscilloscope, etc;
Model UTD1000DL
Functional Menu Settings Description
Self-Calibr. ------ The Oscilloscope will calibrate the system automatically.
Default ------ The Oscilloscope returns to factory default status.
DC Autoset On
Off
Turn on/off DC signal self-identification function
Clear ----- Clear saved or recorded waveforms or settings in the
Oscilloscope, etc;
Key Points:
Self-Calibration: You need to run this operation to avoid any measurement error arising from
environment change. To ensure an accurate calibration, please power on the Oscilloscope and
warm it up for 20 minutes.
Full Autoset: The Oscilloscope can automatically adjust its ranges based on the input signal to
present users optimal waveform without any manual interference.
Loading ...
Loading ...
Loading ...