Loading ...
Loading ...
Loading ...
14 UTD1000L User Manual
: To toggle between vertical position and trigger level, if vertical position is choosen,
vertical reference cursor turns solid, then you can move waveforms vertically with Up
and Down buttons. Press SELECT again to make trigger level cursor solid, and also use
Up and Down buttons to adjust trigger point location
Under MEASURE menu, this button is used to confirm selected parameters, or it is
to toggle between Cursor 1 & 2 under cursor measurement.
: Arrow and OK buttons: OK button is used to hide/display current menu;
under DMM mode, it is used to confirm if current divider has been properly
connected when making A current measurement.
Shortcut Buttons Description:
SHIFT + OK: To save current interface into internal memory, which can be exported externally
by PC which has been loaded with the Oscilloscope software.
SHIFT + AUTO: to open full autoset function, in which the Oscilloscope can automatically
adjust vertical scale and horizontal timebase based on the input signal so that the optimal
waveform can be obtained without any manual operation
SHIFT + F1/F2/F3/F4: To open main trigger menu
Loading ...
Loading ...
Loading ...