Loading ...
Loading ...
Loading ...
UTD1000L User Manual 17
Trigger Coupling DC
Channel Status
CH2 Off (1000DL series)
Trigger Mode Auto
Display Format Vector
Persist Time Auto
Display Style Classic
Manual Display Manual
4.5 Using Functional Menus
The procedures below show you how to select functions with use of oscilloscope menus;
1. Press any functional button on the keypad, then corresponding options will show on the
bottom display, you can select one of these options with use of F1 ~ F4. After that, press OK
button to hide functional menus;
2. For the buttons printed with multiple functions, if you want to choose one of these
functions, please press SHIFT button first, accompanied by shift icon on upper right corner of
display, then press the corresponding button to obtain the function you want.
4.6 Hiding Menus
Press down OK button to hide all button icons and menus. To display menus or button
icons, press OK again.
Note: To set up auto hiding time for menus, please find corresponding option in
CONFIGURE menu.
Figure 4-3 Hiding Menus
4.7 Making Connections for Probe Compensation
Connect the signal as follows:
1. Connect the probe connector to the Oscilloscope input terminal and switch probe factor to
10× on the probe.
2. You also need to set up probe factor on the Oscilloscope, this factor changes vertical scale
and ensures the accuracy for measurements. To set up the probe factor on the Osciloscope,
press CHANNEL button, then F3 to set probe factor to10×.
Loading ...
Loading ...
Loading ...