Loading ...
Loading ...
Loading ...
16 English
Setting up your new microwave oven
Setting up your new microwave oven
The functions and options are listed in the table below.
Function Description Options
1 Filter Remind
The lter remind function can be turned
on and off.
1 On
2 Off
2 Weight Unit
Weight option can display in either
pounds or grams.
1 lb
2 g
3 Sounds You can turn the sound on and off.
1 On
2 Off
4
Remind End
Signal
The remind end signal can be turned on
and off.
1 On
2 Off
5
Use 24-hour
format
The clock can display in either
the 12 hr or 24 hr time mode.
1 12hr
2 24hr
6 Wi-Fi
The Wi-Fi function can be turned on and
off.
1 On
2 Off
NOTE
• If you change your mind while adjusting a setting, touch the Stop button to go
back, and then adjust the setting again.
• If there is a power interruption, you will need to reset these options.
• If the Filter Remind function is On, the microwave will remind you to clean or
replace the grease lter every four months. When it is time to clean or replace
the grease lter, the microwave displays the 'Filter' message to remind you to
clean or replace the grease lter. To remove the message, touch the number
0 when the microwave is in standby mode. If you don't want to receive this
message, set the Filter Remind function Off in System Settings.
Smart control
To use the microwave oven’s Smart Control, you must download the SmartThings
app to a mobile device.
Functions operated by the SmartThings app may not work smoothly if
communication conditions are poor or the microwave oven is installed in a place
with a weak Wi-Fi signal.
How to connect the microwave oven
1. Download and open the SmartThings app on your smart device.
2. Follow the app’s on-screen instructions to connect your microwave oven.
3. To operate smart control function from the microwave oven, touch and hold
OK button for 3 seconds.
4. Once the process is complete, the
icon appears on your microwave oven
display and the app will conrm you are connected.
5. If the connection icon does not turn on, follow the instruction on the app to
reconnect.
Microwave Oven remote control using the SmartThings app
Microwave Oven Monitoring Check the status of the microwave oven
Microwave Oven Remote Control Remotely control vent fan speed/cooktop lamp
NOTE
• For safety reasons, you cannot turn on the microwave oven remotely and you
must specify the cooking time to enable remote control.
• Smart Control will not work properly if the Wi-Fi Connection is unstable.
Loading ...
Loading ...
Loading ...