Loading ...
Loading ...
Loading ...
DPCTrack2
Users Manual
A-4
Instrument Worksheet (Spec Summary)
This report looks similar to the Instrument Calibration Report (Spec Summary) except for
the fact that it has blank lines on which to write the “As-Found” and “As-Left” values for
the Instrument’s calibration. It also has an area in which to document the Test
Instrument(s) used, comments and whether the Instrument passed or failed. You can print
out worksheets for all Instruments due for calibration within a specified period of time
and give them to your technician to complete on the job.
Instrument Worksheet (Spec/Test Point)
This report is similar to the other Instrument worksheet except for the fact that it lists the
stated accuracy, accuracy percentage and resolution for each individual test point, as
opposed to summarizing this information at the top of the report.
Instrument Due Report
This report lists all the Instruments that will be due for calibration within a specified date
range.
Inventory Group
Instrument Inventory
This report shows a list of all Instruments entered for the company. The following fields
from the Master Instrument Record are displayed on the report: Instrument ID,
Description, Manufacturer, Model Number, Serial Number, Last Cal Date, Next Cal Due,
and Status.
Loop Inventory
This report shows a list of all Loops entered for the Company. The following fields from
the Master Loop Record are displayed on the report: Loop ID, Description, Manufacturer,
Last Cal Date, Next Cal Due, and Status.
Test Instrument Inventory
This report lists all Test Instruments entered into the system for the company. The
following fields from the Master Loop Record are displayed on the report: Test
Instrument ID, Description, Manufacturer, Model Number, Serial Number, Last Cal Date,
Next Cal Due, and Status.
Logged Data Group
Data Log Report
This report shows an analysis of a single Logged Record. A line graph is included so that
you may easily view the source values / logged data readings taken over a number of
readings / time.
Loop Group
Loop Bar Code Label
This Bar Code Label contains the actual Bar Code, Item ID, Description and the Last
Calibration Date and its Next Due Date. They may also be scanned back into the program
making the entry of data, creation of records and/or the taking of a physical inventory
faster and easier. Dimensions for this label are 2” X 2”.
Loop Master (Spec Summary)
This is a report that shows all of the master information for a Loop, with the stated
accuracy, accuracy percentage and resolution information for the calibration test points
summarized at the top of the report.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...