FLUKE FLUKE-754/750SW BU User Manual for the Fluke FLUKE-754/750SW BU Documenting Process Calibrator and DPC/TRACK2 Software Bundle

Loading ...

753/754

Users Manual

Display

Figure 6 and Table 5 show a typical display. The display

shown is MEASURE mode. Near the top of the display is

“Source Off.” This display area shows what is happening in

the other mode (SOURCE or MEASURE). The other parts

of the display are:

• Status Bar: Shows the time and date, and the status of

Loop Power, Auto Battery Save, and Backlight Timeout;

all of which are set in Setup mode. The selected HART

channel (if HART is active-754 only) and low-battery

and backlight-on symbols are also show here.

• Mode Indicator: Shows if the Product is in MEASURE

or SOURCE mode. In split screen

MEASURE/SOURCE mode, there is a Mode Indicator

for each window.

• Measured Value: Shows the measured value in a

selection of engineering units or percent of scale.

• Range Status: Shows if Auto Range is on, and what

range is currently in operation.

• Custom Units Indicator: Shows that the displayed

units are custom. The initial engineering units of the

measure or source function are not shown.

• Secondary Value: Shows the measure or source value

in initial engineering units when scaling or custom units

are on.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE-754/750SW BU -754/750SW BU Documenting Process Calibrator and DPC/TRACK2 Software Bundle