Loading ...
Loading ...
Loading ...
en-us Water system
22
Changing the water filter or replacing it with a
bypass cap
1.
Hinge the filter cover upwards.
2. Turn the water filter counterclockwise by 90° and
remove it .
‒ Remove the water filter with care as it is under
pressure.
Note:When removing it, a small amount of water may
drip out of the water filter. Remove the drips of water
with a dry cloth.
Tip:You can dispose of the old water filter with your
household garbage.
3. Insert the new water filter or the bypass cap all the way
into the filter opening and turn it 90° clockwise until it
stops.
4. Close the filter cover.
5. Discard the ice cubes produced during the first
24hours, and dispense water for 5minutes and
discard.
18.2 Water dispenser
Dispense cold water via the water dispenser.
Putting the water dispenser into operation
Note:Once the appliance has been connected or a new
water filter has been installed, there will be air in the water
system.
Requirement:The appliance is connected to the drinking
water connection.
1. Keep dispensing water until it contains no more air
bubbles.
Remove any splashes of water with a dry cloth.
2. For hygiene reasons, dispense water for 5minutes and
discard.
Dispensing water
▶
Press and hold the glass against the dispensing button
or hold the glass under the water dispenser and
press
.
Notes
¡ After a while of continuous dispensing, the water
stops being dispensed. Wait a few seconds before
dispensing water again.
¡ After water has been dispensed several times
consecutively, water stops being dispensed. Wait a
few minutes before dispensing water again.
Water dispenser keylock
The button lock prevents the water dispenser from being
operated accidentally or incorrectly while running.
Switching on the water dispenser button lock
1. Swipe to Water.
2. Press and hold Hold to unlock until the light bar lights
up fully.
a Lock icon lights up.
Switching off the water dispenser button lock
1. Swipe to Water.
Loading ...
Loading ...
Loading ...