Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_155 | REV. D | EN09/23/2022Page 30 of 66
P#829867
UNCRATING
REQUIRED TOOLS
• Cutting Tool
• Hammer
• Crowbar
• Phillips Screwdriver
• Floor Protector
PROCEDURE
The following procedure is recommended for uncrating
the unit:
1. Remove the outer packaging (cardboard and clear
plastic). See fig. 1.
2. Inspect the unit for concealed damage. Immediately
file a claim with the freight carrier if there is damage.
3. Cut the plastic band and remove the foam block.
See fig. 2.
NOTE: MOVE THE UNIT AS CLOSE AS
POSSIBLE TO ITS FINAL LOCATION BEFORE
REMOVING THE SKID.
4. Position the floor protector next to the skid.
5. Carefully lift the unit off the skid and place the unit
on the floor protector. See fig. 3.
6. Remove the interior packaging.
INSTALLATION
FIG. 1.
Pull the staples from the skid.
FIG. 3.
Carefully move the unit off the skid.
FIG. 2.
Remove the foam block after moving the unit as
close as possible to the final installation location.
Loading ...
Loading ...
Loading ...