Jet-USA PRWELEJT54WA RW545 Electric High Pressure Washer User Manual

RW545 Electric Pressure Washer

User Manual

[Revision 3.0 December 2023]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND

MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

RW545 Electric Pressure Washer

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

• Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

General Electrical Safety

• Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• WARNING: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys, and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

Electric Pressure Washer Safety

• The appliance has been designed solely for private use outdoors and not for commercial use. Keep this appliance away from heat, direct

sunlight, moisture and rain, ice and sharp edges.

• Do not allow anybody that has not been trained to use a pressure washer to operate the machine without first reading the instruction manual.

• WARNING: High-pressure washers must not be used by children or untrained persons.

• Before starting your machine, carefully check for defects. If you find any, do not start your machine and contact your local distributor.

• In particular, ensure that the electric cable insulation is in perfect condition and free of cracks. If the electric cable is damaged, an approved local

service centre must replace it.

• WARNING: High pressure jets can be dangerous if they are used incorrectly. The jet must not be directed towards persons, electrical equipment

connected to the mains or the appliance itself.

• WARNING: Do not use the appliance close to other people unless they are wearing protective clothing.

• CAUTION: Do not direct the jet towards yourself or other persons to clean clothing or shoes.

• Hold the lance firmly in your hands.

• The operator and persons within close proximity to the cleaning area must take necessary measures to protect themselves from dislodged debris

when in use.

• Wear protective gloves and clothing during use.

• WARNING: The appliance has been designed for use with a cleaning agent supplied or recommended by the manufacturer. Using other cleaning

products or chemical products may affect the safety of the appliance.

• WARNING: Disconnect the appliance from the power supply before carrying out any maintenance.

• CAUTION: To ensure the safety of the appliance, only use spare parts supplied or approved by the manufacturer.

• Do not use the appliance if the power cable or important parts of the appliance are damaged, for example, the safety device, high pressure hose

and handgun.

• Do not use the appliance with wet hands. If the appliance is damp or wet, unplug it immediately. Do not place it in water.

• The tyres and valves on the tyres can be damaged by the high-pressure jet and could burst.

• Never use the machine in an environment where there is a danger of explosion.

• It is forbidden to clean surfaces containing asbestos at high pressure.

• This high-pressure washer must not be used in temperatures below 0 ° C.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

• CAUTION - The hoses, accessories and high-pressure couplings are important for the safety of the machine. Only use hoses, accessories and

couplings recommended by the manufacturer.

• WARNING: Inadequate extension cables may be dangerous. Cables and spools must always be completely unwound to avoid letting the cable

overheat.

• If an extension cable is used, the plug and socket must be waterproof and conform to the requirements below regarding the length and

dimensions of the cable.

• 1,0 mm ² max. 12,5 m

• 1,5mm²max.20 m

• If the power cable is damaged, it must be replaced by the manufacturer, their service agent or a qualified professional in order to avoid any

danger.

• WARNING: This machine is not designed to be used by persons (including children) with reduced physical, sensory or mental capacities or

whose lack experience or knowledge.

• WARNING: It is advisable that you supervise children to ensure that they do not play with the appliance.

• CAUTION – Risk of explosion – do not spray flammable liquids, do not direct the jet towards flammable liquids.

• WARNING: Water that has circulated in the anti-back flow system is not considered drinkable.

• WARNING: Do not use the appliance if the power cable or important parts of the appliance are damaged, for example, the safety devices, high

pressure hoses and handgun.

• WARNING: If you have an extension cable, it must be waterproof.

• WARNING: When you switch on the machine, a recoil movement is produced due to the force of the water jet. Use two hands to control the

lance. Wear safety gloves when using the appliance. Wear suitable protective clothing.

• In case of accidental contact with detergent, wash with water. If the liquid comes into contact with the eyes, also seek medical assistance (the

detergent can cause irritations or burns).

• In the event that the appliance breaks down, do not attempt to repair it yourself but contact a professional technician to avoid any danger.

Main Power Connection

The following must be observed when connecting the high-pressure washer to the power supply:

• Connecting the electrical connection should be done by a qualified electrician conforming to 60364-1 CEI.

• It is recommended that the electrical supply to this machine should comprise a residual current device which interrupts the current if the leakage

current exceeds 30 mA for 30ms.

Connecting To the Water Network Warning

According to current guidelines, the unit must never be operated without a system separator on the potable water system. Use a EN 12729 type BA

system separator. Water that passes through a system separator is classified as non-potable.

WARNING: Always connect the system separator to the water supply and never directly to the device!

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

Table of Contents

Safety ............................................................................................................................................................. 2

Safety Symbols ........................................................................................................................................................... 5

Parts Identification ....................................................................................................................................... 8

First Time Instructions ................................................................................................................................. 9

Safety Devices ............................................................................................................................................................ 9

Thermal Sensor .......................................................................................................................................................... 9

Operation ..................................................................................................................................................... 10

Garden Hose Connection ......................................................................................................................................... 10

Mounting the High-Pressure Hose ........................................................................................................................... 10

Mounting the Lance and Nozzle ............................................................................................................................... 11

Water Connection ..................................................................................................................................................... 11

Starting and Stopping ............................................................................................................................................... 12

Multi-Nozzle .............................................................................................................................................................. 12

Installation Diagrams ................................................................................................................................................ 13

After Use ................................................................................................................................................................... 13

Maintenance ................................................................................................................................................ 14

Environmental Protection ......................................................................................................................................... 14

General Maintenance ............................................................................................................................................... 14

Inlet Filter .................................................................................................................................................................. 14

Air Vents ................................................................................................................................................................... 14

Adding Grease to Couplings ..................................................................................................................................... 14

Troubleshooting ......................................................................................................................................... 15

Specifications ............................................................................................................................................. 16

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

Parts Identification

No. Name No. Name

1 Spray gun 8 Plug

2 High pressure hose 9 Water inlet hose

3

Water inlet connector

10

Water tap

4

Unit body

11

Detergent bottle

5

Switch

12

Wheel

6

Hose reel

13

Poke needle

7 Power cable 14 Normal nozzle

Spare parts available

for purchase, scan QR

code below:

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

First Time Instructions

This section will explain in detail how to make high pressure washer ready for use.

Safety Devices

•

The unloader valve can reduce pressure if it exceeds pre-set values.

•

Locking device on trigger gun: The trigger gun features a locking device. When the knob is activated, the

trigger gun cannot be operated.

Thermal Sensor

A thermal sensor protects the motor against overloading. The machine will restart after a few minutes when the

thermal sensor has cooled.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

Operation

Garden Hose Connection

1. Screw the water inlet coupling (1) tight on to the water inlet.

Note: The inlet filter (A) must always be fitted in the water inlet pipe to filter out sand, limestone, and

other impurities as these will damage the pump valves.

Caution: Failure to fit the filter will invalidate the warranty.

2. Connect the garden hose with a standard quick coupling.

Mounting the High-Pressure Hose

1. Attach the high-pressure hose to the trigger gun and machine.

2. Detach the high-pressure hose by pressing the pawl (A) or button (B).

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

Mounting the Lance and Nozzle

1. Push the lance into the trigger gun.

2. When inserted turn it.

Caution: Make sure the lance is properly fixed to the gun.

3. Attach the nozzles.

Caution: When attaching the nozzle, the button (A) on the nozzle should come out again. Check

before activating the trigger that the nozzle is properly fixed.

NOTE: All accessories nozzle can be installed, as described above.

Water Connection

Connecting to the water supply pipe

1. Follow your water supplier’s instructions.

2. For connection information, see the specifications and/or online listing.

3. Use a reinforced hose (not supplied) with a standard connection (ext. diameter: 16mm/int. 12mm, maximum

length: 25m).

IMPORTANT! Only use water without any impurities. If there is a risk of sand particles in the inlet

water (i.e., from your own well), an additional filter should be mounted.

4. Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from

penetrating the machine. Note: Check that the filter is fitted in the water inlet pipe and that it is not clogged

up.

5. Connect the water hose to the water supply by means of the quick connector (inlet water, max. pressure: 10

bar, max. temperature: 60°C).

6. Turn on the water.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

Starting and Stopping

1. The trigger gun and lance are affected by a thrust during operation - therefore always hold it firmly with both

hands.

IMPORTANT: Point the nozzle at the ground.

2. Check that the machine is in upright position.

NOTE: Do not place the machine in high grass!

3. Release the trigger lock.

4. Activate the trigger of the trigger gun and let the water run until all air has escaped from the water hose.

5. Press the Start/stop switch.

6. Activate the trigger of the trigger gun.

7. Always adjust the distance and thus the pressure of the nozzle to the surface, which is to be cleaned.

8. Do not cover the machine during operation or use it in a room without adequate ventilation!

NOTE: If the machine is left or not used for 5 minutes, it must be switched off on the start/stop

switch "O":

9. Press the start/stop switch "O".

10. Disconnect the electrical plug from the socket.

11. Shut off the water supply and activate the trigger of the trigger gun to relieve the machine of pressure.

12. Lock the trigger gun.

13. When releasing the trigger of the trigger gun, the machine automatically stops. The machine will start again

when you re- activate the trigger gun.

Multi-Nozzle

The pressure can for the multi nozzle be adjusted by tuning it.

WARNING: Do not do this under operation to avoid that the hand hits the jet.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

Installation Diagrams

Gun Hook Assembly:

Quick connector structure on the unit body. All Accessories can be stored on the unit.

After Use

•

The machine should be stored in a frost-free room.

•

Pump, hose, and accessories should always be emptied of water prior to storing as follows:

− Stop the machine (press the start/stop switch “O” and detach water hose, high pressure hose and

nozzle.

− Restart the machine and activate the trigger of the trigger gun Let the machine run until no more water

runs through the trigger gun.

− Stop the machine, unplug and wind-up hose and cable.

− Place trigger gun, lance, nozzles, and other accessories in the holders of the machine. The hook can be

used for storage of the hose and cord All accessories can be stored in the washer after using.

WARNING: Never start up a frozen machine. Frost damages are not covered by the warranty!

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

Maintenance

Environmental Protection

Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old

appliances. Please dispose your old appliances using appropriate collection systems.

General Maintenance

WARNING! Always disconnect the electrical plug from the socket prior to maintenance or cleaning.

To ensure a long and problem free working life, please take the following advice:

•

Wash out water hose, high pressure hose, spray lance and accessories before mounting.

•

Clean the connectors of dust and sand.

•

Rinse the detergent spraying attachment after use.

•

Clean the nozzles.

•

Any repair should always be made in an authorized workshop with original spare parts.

Inlet Filter

•

Clean the water inlet filter regularly once a month or more frequently according to use.

•

Carefully loosen the filter with a screwdriver and clean it. Check that it is intact before re-mounting it.

•

The inlet filter must always be fitted inside the water inlet pipe to filter out sand, limestone, and other

impurities, as they will damage the pump valves.

CAUTION: Failure to fit the filter will invalidate the warranty

Air Vents

The unit should be kept clean to let cooling air pass freely through the machine vents.

Adding Grease to Couplings

To ensure an easy connection and that O-rings do not dry up, the couplings should be greased regularly.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

Troubleshooting

Problem Possible Cause Recommended Action

Unit will not start

1. The machine is not plugged in.

2. Faulty receptacle.

3. The fuse has blown.

4. Faulty extension cable.

1. Plug the machine in.

2. Try another receptacle.

3. Replace the fuse Unplug other

appliances.

4. Try without the extension cable.

Fluctuating pressure

1. The pump is drawing in air.

2. Valves dirty, worn or sticking.

3. The water supply is not sufficient.

4. Pump seals worn.

1. Check that hoses and connections

are airtight.

2. Contact your service centre.

3. Increase water pressure, check

for blockages and / or change the

large pipe.

4. Contact your nearest service

centre.

The unit stops

1. The fuse has blown.

2. Incorrect mains voltage.

3. Thermal sensor activated.

4. Partially blocked jet.

1. Replace the fuse.

2. Unplug other appliances Check

that the mains voltage

corresponds to the specifications.

3. Leave the machine to cool for 5

mins.

4. Clean the jet with a needle and by

spraying water rearwardly through

the jet.

Blown fuse

1. Fuse too small.

2. Increase in the amperage.

1. Replace it with a fuse with higher

amp consumption than the

washer.

2. Try without the extension cable.

Pulsing unit

1. Air in inlet hose / pump.

2. Inadequate supply of water

generated.

3. Partially blocked jet.

4. Water filter blocked.

5. Folded pipe.

1. Allow machine to run with open

trigger until regular working

pressure resumes.

2. Increase water pressure, check

for blockages and / or change the

large pipe.

3. Clean the jet with a needle and by

spraying water rearwardly through

the jet.

4. Clean the filter.

5. Unfold the pipe.

The unit turns on and off by

itself

1. Pump fuse and/or trigger out of

order.

2. No water supply.

1. Contact your nearest service

centre.

2. Connect the inflow water.

The unit is on, but no water

comes out

1. Water filter blocked.

2. Blocked jet.

1. Clean the filter.

2. Clean the jet with a needle and by

spraying water rearwardly through

the jet.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RW545 Electric Pressure Washer

Specifications

Motor Type Water-cooled

Voltage 240V / 50Hz

Maximum Pressure 3000PSI

Max Flow Rate 7.5L/min

Rated Flow Rate 6.5L/min

Max Water Temp 50℃

Hose Length 10m

Power Cord Length 5m

Power Plug Australian Standard

Certificates/Approvals GS/CE, RoHS, SAA (power plug)

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Jet-USA PRWELEJT54WA RW545 Electric High Pressure Washer

Product's Documents

Product manual

Specifications

Jet-USA PRWELEJT54WA Questions and Answers