Jet-USA PRSWSH-ELEC-3200WF High Pressure Washer 3500PSI User Manual

WARNING! Read and understand all

safety warnings and instructions

carefully before using this machine.

Failure to follow the warnings and

instructions may result in electric

shock, fire and/or serious injury. Save

this manual for future reference.

ATTENTION! Products covered by

this manual will vary in appearance,

assembly, inclusions, description and

packaging.

NOTE! This manual covers multiple

styles of product as well as options /

accessories that may not be suitable

for the machine you have purchased.

Electric Pressure

Washers

User Manual

[Revision 16.0 November 2023]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND

MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

Product Manual – Electric Pressure Washer

Index

Index ............................................................................................................................................................... 1

Safety .............................................................................................................................................................. 2

Parts Diagram ................................................................................................................................................. 5

Spare Parts ..................................................................................................................................................... 6

Assembly ........................................................................................................................................................ 7

The handle ...................................................................................................................................................................................... 7

Trigger Assembly (PRWELCJETA500, PRWELC450USAACAB & PRWELCJETA470) ................................................................ 8

Connecting the hoses ..................................................................................................................................................................... 9

Operation ...................................................................................................................................................... 10

Before Use .................................................................................................................................................................................... 10

Start Up ......................................................................................................................................................................................... 10

Shut Down .................................................................................................................................................................................... 10

Nozzle selection ............................................................................................................................................................................ 11

Turbo nozzle (if equipped) ............................................................................................................................................................ 11

Twist-adjustable nozzle (if equipped) ............................................................................................................................................ 12

Angle to the cleaning surface ........................................................................................................................................................ 12

How to avoid damaging surfaces .................................................................................................................................................. 12

Detergents .................................................................................................................................................................................... 13

Detergent Application .................................................................................................................................................................... 13

Initial High Pressure Rinse ............................................................................................................................................................ 14

Final Rinse .................................................................................................................................................................................... 14

Storage ......................................................................................................................................................... 14

Maintenance ................................................................................................................................................. 15

Nozzle cleaning instructions .......................................................................................................................................................... 15

Water screen ................................................................................................................................................................................. 15

Hose Care ..................................................................................................................................................................................... 15

Troubleshooting ............................................................................................................................................ 16

Specifications ................................................................................................................................................ 17

Product Manual – Electric Pressure Washer

301123144200

2

Safety

It is important you read and

understand the instruction

manual before use and

keep the manual in a safe

place for future reference.

Safety precautions must be

observed to reduce the risk

of personal injury when

operating this machine.

If you are not familiar with

the safe operation /

handling of this equipment,

or are in any way unsure of

any object of this products suitability or

correct use for your application you

should complete training conducted by

a person or organisation qualified in

safe use and training related to this

product. This includes fuel / electrical

handling and safety if applicable to this

product or your application.

General safety

Like all equipment this unit must be

handled carefully. Exposure to fumes

and gases can damage the lungs and

respiratory system or cause

asphyxiation. Do not expose yourself or

others to danger. Do not permit others

to use the equipment unless they have

read this manual and are trained in its

operation. Do not operate if the

equipment is damaged or is in an

excessively worn state. The term

“equipment" in all of the warnings refers

to your product be that mains, battery or

fuel powered products refers to any part

of the product(s) / device(s) both directly

and indirectly related to its function and

use.

Work area safety

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate equipment in explosive

atmospheres, such as in the presence

of flammable liquids, gases or dust.

Engines and equipment create sparks

which may ignite the dust or fumes.

Keep children and bystanders away

while operating equipment. Never allow

children to access the equipment. Avoid

operating while people, especially

children or pets are nearby. To reduce

the risk of injury or damage, do not allow

any other persons within a radius of 5

metres of your own position.

Personal safety

Prevent unintentional starting. Ensure

equipment switches are in the off-

position before connecting to power

source and/or battery pack, picking up

or carrying the equipment. Stay alert,

watch what you are doing and use

common sense when operating

equipment. Do not use equipment while

you are tired or under the influence of

drugs, alcohol or medication. A moment

of inattention while operating equipment

may result in serious personal injury.

Use personal protective equipment.

Always wear eye protection. Protective

equipment such as a respirator, non-

skid safety shoes, hard hat, or hearing

protection used for appropriate

conditions will reduce personal injuries.

Ensure the equipment is switched off

before connecting a to power source,

picking up or carrying the equipment.

Carrying equipment with your finger on

the switch or energising equipment that

have the switch may invite accidents.

Remove any adjusting key or wrench

before turning the equipment on. Do not

overreach. Keep proper footing and

balance at all times. This enables better

control of the equipment in unexpected

situations. If devices are provided for

the connection of dust extraction and

collection facilities, ensure these are

connected and properly used. Use of

dust collection can reduce dust-related

hazards. Never touch the mains plug

and the socket with wet hands. This

(appliance / equipment / product) is not

intended for use by persons with

reduced physical, sensory or mental

capabilities. Do not use the appliance

when there are other persons around

unless they are also wearing safety

equipment. Keep packaging film away

from children - risk of suffocation! The

operator must use the appliance

correctly. When working with the

appliance, he must consider the local

conditions and pay due care and

attention to other persons, in particular

children, who are nearby. If equipped;

high pressure hoses, fixtures and

couplings are important for the safety of

the appliance. Only use high pressure

hoses, fixtures and couplings

recommended by the manufacturer.

Dress properly. Do not wear loose

clothing or jewellery. Keep your hair and

clothing away from the work area. Loose

clothes, jewellery or long hair can be

caught in moving parts. You must wear

appropriate protective equipment when

operating, servicing, or when in the

operating area of the equipment to help

protect you from serious injury, including

eye injury, inhalation of toxic fumes,

burns, and hearing loss. Wear

protective clothing and safety goggles to

protect against splash back containing

water or dirt.

Electrical safety

Electric Shock can kill. Power plugs

must match the outlet. Never modify a

plug in any way. Do not use any adapter

plugs with earthed (grounded)

equipment. Unmodified plugs and

matching outlets will reduce risk of

electric shock. Avoid body contact with

earthed or grounded surfaces, such as

pipes, radiators, ranges and

refrigerators. There is an increased risk

of electric shock if your body is earthed

or grounded. Do not expose equipment

to rain or wet conditions. Water entering

equipment will increase the risk of

electric shock. Do not abuse the cord.

Never use the cord for carrying, pulling

or unplugging the equipment. Keep cord

away from heat, oil, sharp edges or

moving parts. Damaged or entangled

cords increase the risk of electric shock.

When operating any equipment

outdoors, use an extension cord

suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk

of electric shock. If operating equipment

in a damp location is unavoidable, use a

residual current device (RCD) protected

supply. Use of an RCD reduces the risk

of electric shock. For safety reasons, we

recommend any electrical equipment

that you operate be via a residual-

current circuit breaker (RCD). Safety

devices protect the user and must not be

modified or bypassed. Always use a

Residual Current Device (RCD) (GFCI)

/ Earth Leakage Circuit Breaker / Safety

Switch when operating this item

(electrical items only).

Equipment use and care

Do not force the equipment. Use the

correct equipment for your application.

The correct equipment will do the job

better and safer at the rate for which it

was designed. Do not use the

equipment if the On/Off switch does not

turn it on and off. Any equipment that

cannot be controlled with the On/Off

switch is dangerous and must be

repaired. If applicable, disconnect the

any plugs from a power source and/or

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

Product Manual – Electric Pressure Washer

301123144200

3

JETUSA

the battery pack from the equipment

before making any adjustments,

changing accessories, or storing

equipment. Such preventive safety

measures reduce the risk of starting the

equipment accidentally. Do not allow

persons unfamiliar with the equipment

or these instructions to operate the

equipment. Equipment is dangerous in

the hands of un-trained users. Maintain

equipment. Check for misalignment or

binding of moving parts, breakage of

parts and any other condition that may

affect the equipment's operation. If

damaged, have the equipment repaired

before use. Many accidents are caused

by poorly maintained equipment.

If applicable keep equipment properly

maintained, cutting tools with sharp

cutting edges are less likely to bind and

are easier to control. Use the equipment

and accessories etc. in accordance with

these instructions, taking into account

the working conditions and the work to

be performed. Use of the equipment for

operations different from those intended

could result in a hazardous situation.

Always clean dust and dirt off the

equipment – do not use any grease

solvents. Always keep the equipment

clean. After use, the equipment and

components may still be hot. Never

place the equipment in any places

where there are flammable materials

such as dry grass, combustible gases or

combustible liquids etc. Let the

equipment cool before storing indoors.

Service

Have your equipment serviced by a

qualified repair person using only

identical replacement parts. This will

ensure that the safety of the equipment

is maintained. Do not attempt any

maintenance or repair work not

described in this instruction manual.

Have all other work performed by an

authorised service person. We

recommend that you have servicing and

repair work carried out exclusively by an

authorised service person. Before

proceeding to adjust or repair the

equipment; be sure to stop the

equipment and detach and power

source or spark plug (if equipped).

Never attempt to make adjustments

while the equipment is running.

Always make adjustments with the

equipment resting on a flat, clear

surface. Replace any worn, damaged or

removed warning labels immediately.

Portable washer safety

This appliance is not intended for use by

persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they have been

given supervision or instruction

concerning use of the appliance by a

person responsible for their safety.

This product is not intended for pumping

water in a home domestic application.

Do not use it for corrosive, abrasive,

explosive or dangerous liquids. Fluids

other than water will damage the water

pump and/or create a fire hazard. High

pressure jets can be dangerous if

subject to misuse. The jet must not be

directed at persons, live electrical

equipment or the appliance itself. Do not

use the appliance within range of

persons unless they wear protective

clothing. Disconnect from the power

supply before carrying out user

maintenance. High pressure cleaners

shall not be used by children or

untrained personnel. To ensure

appliance safety, use only original spare

parts from the manufacturer or

approved by the manufacturer. High

pressure hoses, fittings and couplings

are important for the safety of the

appliance. Use only hoses, fittings and

couplings recommended by the

manufacturer.

Automatic ON/OFF

The motor on this pressure washer does

not run continuously. It only runs when

the trigger of the spray gun is squeezed.

After following the start-up procedures

in this manual, turn the pressure washer

ON and squeeze the trigger for

activation. See “Operating Instruction”

section in this manual for further details.

The electric supply to this machine

should include either a residual current

device that will interrupt the supply if the

leakage current to earth exceeds 30 mA

or a device that will prove the earth

circuit.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

Product Manual – Electric Pressure Washer

301123144200

4

JETUSA

BEFORE USE! If you are not familiar with the safe operation / handling of this equipment, or are in any way unsure of any object of this products

suitability or correct use for your application you should complete training conducted by a person or organisation qualified in safe use and training related

to this product. This includes fuel / electrical handling and safety if applicable to this product or your application.

WARNING! Only a fully licenced electrician should perform installation or maintenance where terminals/wiring/circuit boards that may at any time be live

with 240V AC electricity are accessed.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

5

Parts Diagram

ATTENTION! Products covered by this manual will vary in appearance, assembly,

inclusions, description and packaging.

1. Water inlet connector

2. 240V Electrical plug

3. Storage hook*

4. Water outlet

5. Power ON / OFF Switch

6. Trolley handle*

7. Nozzle storage*

8. Foot

9. Wheel

10. High pressure hose

11. Trigger gun

12. Trigger lock

13. Hose reel*

14. Handle for hose reel*

15. Spray Lance*

16. Adjustable Nozzle*

17. Detergent attachment*

18. Turbo Nozzle*

19. Angle Nozzle*

20. Brush*

21. Patio Cleaner*

*Options displayed above cover a broad range of models and types of electric pressure washers. Some items may not be

suitable for some models while other items may be option extras or promotional items.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

6

Spare Parts

Spare parts available for purchase, scan QR codes below:

QR Code SKU QR Code SKU

PRES-ELEC-11095

PRWELCJETA500

PRWELCJETA470

PRSWSH-ELEC-

3200WF

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

7

Assembly

The handle

NOTE! Some models come with handles fully assembled.

- Insert cable hook hold into the machine (figure 1a).

- Align holes on the bottom of the pressure cleaner as shown and tighten the 2 screws using a

screwdriver (figure 1b).

Figure 1a Figure 1b

Above images apply to the RX470 model.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

8

Trigger Assembly (PRWELCJETA500, PRWELC450USAACAB & PRWELCJETA470)

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

9

Trigger Safety lock OFF

Trigger Safety lock ON

Connecting the hoses

Most hoses are fitted with a quick connect fitting for which you only need to push until it click’s into place.

Thre

aded connections (if equipped) are right hand thread; screw them on in a clockwise direction until

firmly in place. Do not over tighten or the connector could be damaged.

NOTE: Before use, tighten the nut that secures the hose to

the gun with a 17mm spanner, this will minimize leaks and

maximise pressure. Thread tape is also recommended.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

10

Operation

WARNING! This unit is to be connected to a cold-water source only.

IMPORTANT! The motor of yours pressure washer will not run until the trigger is squeezed.

IMPORTANT! Always turn off the unit’s motor before turning off the unit’s water supply. Serious

damage could occur to the motor if the unit is run without water. Using long extension leads can result

in reduced power in some cases.

WARNING! Never disconnect the high-pressure discharge hose from the machine while the system is

still pressurised. To depressurise the unit, turn off the motor, turn off the water supply and squeeze the

trigger 2-3 times.

Before Use

1. W

ater Inlet “Screen/filter” located behind the “water inlet connector” must be inspected regularly, so

as to avoid blockage and restriction in the water supply to the pump.

2. Make sure all hoses and parts are fitted securely.

Start Up

1. C

onnect the outlet hose to the washer and connect the spray gun to the outlet hose.

2. Connect nozzle and nozzle extension (if equipped).

3. Check wire mesh filter is clear of any blockage or debris.

4. Connect the water supply hose.

5. Check that the hose has no kinks in it.

6. Turn on water and check for leaks.

7. Depress trigger to allow air to be expelled though the pump and hoses, lock the trigger.

8. Plug in machine and turn power switch “ON”.

9. Unlock trigger and use the pressure washer.

Shut Down

1.

Turn power switch “OFF”.

2. Unplug the unit from the power source.

3. Turn off the water supply.

4. Press the trigger repeatedly of the gun to depressurise the system.

5. Disconnect the garden hose from the pressure washer.

6. Wipe all surfaces of the unit with a damp clean cloth.

7. Engage the gun safety lock.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

11

Nozzle selection

NOTE! Some portable pressure washers come with five nozzle attachments for different uses. Refer to

the diagram (below) and on the pressure washer itself to see which nozzle is applicable for your

purpose.

Turbo nozzle (if equipped)

A

turbo nozzle is a very effective tool that can significantly reduce

cleaning time. The turbo nozzle combines the power of a narrow high

impact stream and the efficiency of a 25-degree fan pattern. This

swirls the narrow high impact stream into a cone shape that cleans a

larger area.

CAUTION! A turbo nozzle uses a narrow high impact stream;

only use it in applications where the cleaning surface cannot be

damaged by narrow high impact spray. The turbo nozzle is NOT

adjustable and cannot be used to apply detergent.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

12

Twist-adjustable nozzle (if equipped)

T

he angle of spray coming out of the lance may be adjusted on

some lances by rotating the nozzle. This will vary the spray

pattern from approximately a 0° narrow high impact stream to a

60° wide fan spray (Figure2)

A narrow stream has high impact force on the cleaning surface

and results in maximum deep cleaning in a concentrated area.

However, this narrow high impact spray must be used

cautiously, as it may damage some surfaces (figure 3)

A wide fan pattern will distribute the impact of the water over a

larger area, resulting in excellent cleaning action with a

reduced risk of surface damage, Large surface areas can be

cleaned more quickly using a wide fan pattern (figure 4)

Angle to the cleaning surface

W

hen spraying water against a surface, maximum impact is generated

when the water strikes the surface “head on.” However, this type of

impact tends to cause dirt particles to imbed in the surface, thereby

preventing the desired cleaning action.

The optimum angle for spraying water against a cleaning surface if 45

degrees.

Spraying water against a surface at this angle provides for the most

beneficial impact force combined with efficient removal of debris from

the surface.

Distance from cleaning surface

Another factor that determines the impact force of the water is the distance from the spray nozzle to the

cleaning surface. The impact force of the water is increased as the nozzle is moved closer to the surface.

How to avoid damaging surfaces

Damage to cleaning surfaces occurs because the impact force of the water exceeds the durability of the

surface. Never use a narrow high impact stream or a turbo/rotary nozzle on a surface that is susceptible to

damage. Avoid spraying windows with a narrow high impact stream or turbo nozzle as this may cause

breakage.

The recommended way to avoid damaging surfaces is as follows:

- Before triggering the gun, adjust the nozzle to a wide fan pattern.

- Place the nozzle approximately 4-5 feet from and 45 degrees to the cleaning surface and trigger

the gun.

- Vary the fan pattern spray angle and the distance to the cleaning surface until optimum cleaning

efficiency is achieved without damaging the surface.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

13

Detergents

The use of detergents can dramatically reduce cleaning time and assist in the removal of difficult stains.

Some detergents have been customised for pressure washer use on specific cleaning tasks. These

detergents are approximately as thick as water. The use of thicker detergents, such as dish soap, will clog

the chemical injection system and prevent the application of the detergent. The cleaning power of

detergents comes from applying them to a surface and giving the chemicals time to break down the dirt and

grime. Detergents work best when applied at low pressure. The combination of chemical action and high-

pressure rinsing is very effective. On vertical surfaces, apply the detergent starting at the bottom and work

your way upward. This will prevent the detergent from sliding down and causing streaks. High pressure

rinsing should also progress from the bottom to top. On particularly tough stains, it may be necessary to

use a brush in combination with detergents and high pressure rinsing.

The following cleaning procedure will help you to organize your cleaning task and ensure that you achieve

the most beneficial results in the shortest amount of time. Remember to use the spraying/cleaning

techniques previously listed.

Detergent Application

IMPORTANT! Only use the instructions appropriate for model purchased.

NOTE! Use only detergents formulated for pressure washes.

NOTE! Test detergent in an inconspicuous area before use.

For Units with Detergent Applicator Included; follow manufacturer’s

label directions for mixing correct concentrations of detergent to water

ratio through the pressure washer is approximately 5.4% (1 part

detergent to 19 parts water).

NOTE! Some pressure washers have a built in detergent container,

others have a separate gun attachment for this purpose.

1. Unscrew to top of detergent applicator and fill applicator with detergent.

2. Replace top on applicator.

3. Remove lance from gun.

4. Attach detergent applicator to gun, if equipped (See below).

5. Apply detergent so it thoroughly covers cleaning surface. Apply from bottom to top to prevent

detergent from sliding down and streaking.

6. Allow detergent to remain on the surface for a few minutes. This is a good time to use a brush to

lightly scrub heavily soiled areas. Never allow detergent to dry on the cleaning surface.

7. Remove detergent applicator from gun and replace with the lance or remove applicator from end of

lance.

8. Rinse detergent from surface.

NOTE! Flush detergent applicator with clear water following each use.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

14

Initial High Pressure Rinse

Spray the cleaning surface with water to clear off any dirt or grime that may have collected on the surface.

This will allow your detergent to attack the deep down dirt that has worked its way into the cleaning surface.

Before triggering the gun, adjust the nozzle to a wide fan pattern and slowly adjust to the desired spray

pattern. This will help you avoid applying too much concentrated spray to the surface which could cause

damage.

Final Rinse

S

tart final rinse from the bottom of your item and work your way upward. Make sure you thoroughly rinse

the surface and that all detergent has been removed.

1. Shut down

2. Be sure all detergent is flushed from system.

3. Turn off motor.

4. Turn off water supply.

5. After motor and water supply are turned off, trigger gun to depressurize system.

DANGER! Never turn water supply off before turning motor off. Serious damage could occur to the

pump and/ or motor.

DANGER! Never disconnect high pressure discharge hose from machine while system is pressurized.

To depressurize, turn motor off, turn water supply off and squeeze gun trigger times.

Storage

Do not store pressure washer outdoors or where it might freeze.

Tips for extending the life of your pressure washer;

• Never operate unit without water.

• Pressure washer is not meant to pump hot water. Never connect to warm water supply – this will

significantly reduce life of the pump.

• Using the wrong detergent other than recommended may cause damage to pump components (O-

rings, etc.).This also applies to chemicals such as bleach, dish soap, etc.

• Before adjusting a nozzles pressure (high-to-low or low-to-high) release trigger. Failure to do so will

reduce life of O-rings in lance.

NOTE! When the pressure washer is not being operated or is being stored more than one month, it is

recommended that you turn off and disconnect the power.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

15

Maintenance

Nozzle cleaning instructions

NOTE! A clogged or partially clogged nozzle can cause a significant reduction of water coming out of

the nozzle and cause the unit to pulsate while spraying.

To clean out the nozzle:

1. Turn off and unplug unit.

2. Turn off water supply. Relieve any pressure trapped in the

hose by squeezing trigger 2-3 times.

3. Separate lance from gun.

4. Rotate nozzle to the narrow stream setting. This opens up

the fan blades.

5. Using included tip cleaner, or an unfolded paper clip,

insert wire into the nozzle hole and move back and forth

until debris is dislodged. (See image)

6. Remove additional debris by back-flushing water through

the nozzle. To do this, place end of a garden hose (with

water running) to end of nozzle for 30-60 seconds.

Water screen

Some pressure washers are equipped with a water inlet screen to protect the pump. If the screen is not

kept clean, it will restrict the flow of water to the pressure washer and may cause damage to the pump.

• The screen is fragile so be careful when cleaning or removing it. Any foreign particles entering the

pump may damage it.

• Do not operate the pressure washer without the screen in place (if originally equipped.)

• Remove the screen and back-flush to remove impurities from the screen.

• Replace afterwards immediately

Hose Care

To extend your hose life, you’ll want to drain the hose after use. Don’t rely on the nozzle to cut the

w

ater when you are done. If you do, the water pressure builds up inside the hose and can burst it. The

better procedure for the hose upkeep is to turn off the water at the spigot and allow the hose to drain.

Another way to keep your hose in good shape for longer is to avoid dragging it by the spray trigger

assembly. This weakens the coupler connection and causes leaks.

Also, don’t just leave it in a pile when you are finished with it. Using the included hose reel prevents

kinks that create tears.

Finally, there is the issue of storing a hose over winter. If you live in a cold winter region, you’ll want to

bring the hose into the garage (or somewhere inside) to prevent freezing. Drain the entire hose first,

then coil it on a hose reel and carry it inside.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

16

Troubleshooting

Symptom

Possible cause(s)

Corrective Action(s)

No detergent suction –

units with tanks

1. Nozzle pressure set to

“high”.

2. High pressure extension

hose is too long.

3. Injector clogged on pump.

1. Adjust nozzle to “low

pressure” or replace tip with

the low pressure detergent

application tip.

2. Remove high pressure

extension hose or use high

pressure hose shorter than

25 feet.

3. Contact the distributor

No detergent suction –

units with attachable

applicators

1. Detergent applicator is

clogged

1. Clean applicator with warm

water.

2. Replace the applicator.

Unit begins to smoke

1. Overheated, overloaded or

damaged motor.

1. Turn off and call the dealer.

Pressure washer does

not start up

1. Unit is pressurised.

2. Plug is not well connected

or electrical socket is faulty.

3. Extension cord is too long or

wire size too small.

4. Main voltage supply is too

low.

5. Thermal safety switch has

tripped.

1. Squeeze trigger on gun &

check for blockages.

2. Check plug, socket and

fuse.

3. Remove extension cord.

4. Check that main supply

voltage age is adequate.

5. Switch off motor unit and

allow motor to cook down.

Pump does not reach

necessary pressure

1. Water inlet filter is clogged

2. Pump is sucking air from

hose connections

3. Nozzle is worn or not correct

4. Unloader is clogged or Worn

5. Valves is clogged or worn

1. Clean the water inlet filter.

2. Check that connections and

locking ring are properly

tightened.

3. Call the dealer.

4. Call the dealer.

5. Call the dealer.

Fluctuating Pressure

1. Pump is sucking in air.

2. Clogged nozzle.

3. Valves dirty, worn or stuck.

4. Water Seals worn.

1. Check that the hoses and

connections are tight.

2. Clean with tip cleaner(see

page 8)

3. Call the dealer

4. Call the sealer

Motor stops suddenly

1. Extension cord is too long or

wire size too small.

2. Thermal safety switch has

tripped due to overheating.

1. Remove extension cord

(see page 4)

2. Check that main supply

corresponds to

specifications.

Weak water pressure

1. Nozzle is set to low.

1. Please check the nozzle to

ensure it is set to High. If the

nozzle is set to low, then the

pressure will be weak.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

17

Specifications

PRES-ELEC-11095

Voltage: 240V / 50Hz (10 Amp Plug)

Motor (W): 2350

Max. Rated PSI: 3200

Continuous rated PSI: 1800

Flow Rate (L/min): 6.5

Hose length (m): 5

Detergent tank: Included

Power Cable Length (m): 5

Max inlet temp (°C): 50

Turbo Nozzle Connector Size: Standard 1/4" BSP

Quick Connect

PRES-ELEC-13595

Voltage: 240V / 50Hz (10 Amp Plug)

Motor (W): 1850

Max. Rated PSI: 3200

Continuous rated PSI: 2000

Flow Rate (L/min): 5.7

Hose length (m): 8

Detergent tank: Included\

Power Cable Length (m): 5

Max inlet temp (°C): 50

Hose reel: Included

PRWELC450USAACAB

Voltage: 240V / 50Hz (10 Amp Plug)

Motor (W): 1850

Max. Rated PSI: 2900

Continuous rated PSI: 1600

Flow Rate (L/min): 5

Hose length (m): 8

Detergent tank: Included

Power Cable Length (m): 5

Max inlet temp (°C): 50

Turbo Nozzle Connector Size: Standard 1/4" BSP

Quick Connect

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

18

PRWELC550USAACAB

Voltage: 240V / 50Hz (10 Amp Plug)

Motor (W): 3200

Max. Rated PSI: 3800

Continuous rated PSI: 2500

Flow Rate (L/min): 8.5

Hose length (m): 30

Detergent tank: Included

Power Cable Length (m): 5

Max inlet temp (°C): 50

Hose reel: Included

PRSWSH-ELEC-3200WF

Voltage: 240V/50HZ

Motor: 3000W (Peak) Induction

Maximum Pressure: 3500PSI (241Bar)

Continuous Pressure: 2500PSI (172Bar)

Rated Flow Rate: 6.8L/min

Max Flow Rate: 8.5L/min

Hose Length: 10m

Detergent Bottle: 1.0L

Max Water Temp: 50°C

Power Cable: 5m

Turbo Nozzle Connector Size: Standard 1/4" BSP

Quick Connect

PRWELCJETA470

Voltage: 240V/50HZ

Power: 2100W

Motor: Brush Motor (Aluminium)

Maximum Pressure: 3100PSI (241Bar)

Continuous Pressure: 2000PSI (138Bar)

Flow Rate: 6.2L/min

Max Flow Rate: 7.1L/min

Turbo Nozzle Connector Size: Standard 1/4" BSP

Quick Connect

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

19

PRWELCJETA500

Voltage: 240V/50HZ

Motor Power: 2400W (Peak) Induction

Maximum Pressure: 3500PSI (241Bar)

Continuous Pressure: 2150PSI (148Bar)

Rated Flow Rate: 6.5L/min

Max Flow Rate: 8.2L/min

Cable Length: 5m

Hose Length: 8m

Turbo Nozzle Connector Size: Standard 1/4" BSP

Quick Connect

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

20

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more

information, see www.datastreamserver.com/safety

Consult all documentation, packaging and

product labelling before use. Note that some

products feature documentation available

online. It is recommended to print and retain

the documentation.

Before each use, check the product for

loose/broken/damaged/missing parts, wear

or leaks (if applicable). Never use a product

with loose/broken/damaged/missing parts,

wear or leaks.

Products must be inspected and serviced (if

applicable) by a qualified technician every 6

months. This is based on average residential

use by persons of average size and strength,

and on a property of average metropolitan

size. Use beyond these recommendations

may require more frequent

inspections/servicing.

Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed access

to the product.

The product has been supplied by a general merchandise

retailer that may not be familiar with your specific application

or description of application. Be sure to attain third-party

approval from a qualified specialist for your application before

use, regardless of any assurances from the retailer or its

representatives.

This product is not intended for use where fail-safe operation

is required. As with any product (for example, automobile,

computer, toaster), there is the possibility of technical issues

that may require the repair or replacement of parts, or the

product itself. If the possibility of such failure and the

associated time it may take to rectify could in any way

inconvenience the user, business or employee, or financially

affect the user, business or employee, then the product is not

suitable for your requirements. This product is not intended

for use where incorrect operation or a failure of any kind,

including but not limited to, a condition requiring product

return, replacement, parts replacement or service by a

technician may cause financial loss, loss of employee time or

an inconvenience requiring compensation.

If this product has been purchased in error when considering

the information presented here, contact the retailer directly

for details of their returns policy, if required.

ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval

system, without express permission or consent from the publisher.

Jet-USA PRSWSH-ELEC-3200WF High Pressure Washer 3500PSI Electric Cleaner

Product's Documents

Product manual

Specifications

Jet-USA PRSWSH-ELEC-3200WF Questions and Answers