Axis A4011-E Installation Guide

Loading ...

AXIS A4011-E Reader

Identication Types

Identication types are portable credential storage devices, pieces of memorized information, or

various combinations of the two that determine how users will be granted access to the door.

Common identication types include tokens such as cards or key fobs, personal identication

numbers (PINs), and request to exit (REX) devices.

The reader supports the following formats:

• MIFAREp DESFirep

• MIFAREp Classic

• iClassp

To program the reader for MIFAREpClassic sector reading, a customer-specic setup card is needed.

For more information, contact Axis Support at www.axis.com/techsup.

Power & Data Connector

4-pin terminal block for DC power input and data. Supports RS485 and

OSDP protocols for communication with the door controller.

NONO

TICETICE

TICE

Use a Safety Extra Low Voltage (SELV) compliant limited power source (LPS) with either

a rated output power limited toื100 W or a rated output current limited to ื5 A. For

example, AXIS A1001 Network Door Controller fullls these requirements when powered

by Power over Ethernet (PoE) or a SELV-compliant LPS.

Function Pin Notes

Specications

DC input

Power input from controller or

external power supply. Note: This

pin can only be used as power in.

Min 12 V DC (-10%)

Max 24 V DC (+15%)

0VDC(-)

RS485

For half duplex RS485 (RX/TX)

Important

• The recommended maximum cable length is 30 m (98.4 ft).

• To use the reader with AXIS A1001, connect the RS485 wires from A to B and from B to A.

For more information about Axis network door controller connections, see the hardware

pin chart, generated through the door controller’s hardware conguration, and the User

Manual, available at www.axis.com.

Loading ...

Axis A4011-E Reader