Loading ...
Loading ...
Loading ...
Troubleshooting en-us
31
Issue Cause and troubleshooting
E:9240 lights up. Filters are soiled or blocked.
▶ Clean the filters.
→
"Cleaning filters", Page27
A different error code appears in
the display window.
E:0100 to E:9010
There is a technical issue.
1. Press .
2. Pull out the power cord plug of the appliance or switch off the breaker.
3. Wait at least 2minutes.
4. Insert the power cord plug of the appliance in a power outlet or switch on the
breaker.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press .
‒ Turn off the water faucet.
‒ Pull out the power cord plug.
‒ Contact customer service →
Page38
and give the error code.
Dishware is not dry. No rinse aid used or dosage set too low.
1.
Add Rinse aid →
Page17
.
2. Set the amount of rinse aid to be dispensed.
→
"Setting the amount of rinse aid", Page18
Cycle or cycle option has no drying phase, or drying phase is too short.
▶
Select a wash cycle with drying. →
Page10
Some option buttons decrease the drying result.
Water collects in recesses of dishware or silverware.
▶ Position dishware at an angle where possible.
The combined detergent used has a poor drying performance.
1. Use rinse aid to improve drying performance.
2. Use a different combined detergent with a better drying performance.
Extra Dry/intensive drying not activated to improve drying performance.
▶
Activate Extra Dry/intensive drying →
Page24
.
Dishware removed too early or drying process not yet ended.
1. Wait until the program ends.
2. Only remove dishware 30minutes after the program has ended.
Rinse aid used has a limited drying performance.
▶ Use a name-brand rinse aid.
Eco products may have limited effectiveness.
Loading ...
Loading ...
Loading ...