Loading ...
Loading ...
Loading ...
en-us Before using for the first time
16
Before using for the first time
8 Before using for the first time
Before using for the first time
8.1 Initial use
Before the first use or after a factory reset, you will need to
configure the settings. The display shows the settings for
the first use.
Tip:Connect your appliance to a mobile device. You can
conveniently change all settings using the
HomeConnect® app.
→
"HomeConnect® quick start", Page25
Requirement:The appliance has been installed and
connected.
1. Add special salt.
2.
Add rinse aid. →
Page17
3. Switch on the appliance.
a The display shows the settings for initial use.
4. Press repeatedly until the display shows the required
setting.
Note:If you select HomeConnect® with the setting
Initial use , make further settings using the
HomeConnect® app on your mobile device.
You can change the settings for initial use and other
Basic settings on the appliance at any time or using the
HomeConnect® app on your mobile device.
5. Press or repeatedly until the display shows the
right value.
You can change one or more settings.
6. To save the settings, press for approx. 3seconds.
7. Add detergent.
8. Start the Program with the highest cleaning temperature
without dishware.
To remove any marks from water or other residues, we
recommend you operate the appliance without dishware
before using it for the first time.
Water softening system
9 Water softening system
Water softening system
Hard water leaves limescale on dishware as well as the
washing tank, and parts of the appliance may become
blocked.
To ensure good dishwashing results, you can treat the
water with special salt and the water softening system. To
avoid damage to the appliance, water with a hardness
above 9°E must be softened.
9.1 Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here.
You can find out how hard your water is from your local water company or by using a water hardness tester.
Water hardness °E Hardness range mmol/l Setting value
0 - 8 soft 0 - 1.1 0 - 8
9 - 10 soft 1.2 - 1.4 9 - 10
11 - 12 medium 1.5 - 1.8 11 - 12
13 - 15 medium 1.9 - 2.1 13 - 15
16 - 20 medium 2.2 - 2.9 16 - 20
21 - 26 hard 3.0 - 3.7 21 - 26
27 - 38 hard 3.8 - 5.4 27 - 38
39 - 62 hard 5.5 - 8.9 39 - 62
Note:Set the water hardness determined on your
appliance.
→
"Setting the water softening system", Page16
With a water hardness of 0 - 8°E you can dispense with
special salt for dishwashers and switch off the water
softening system.
→
"Switching off the water softening system", Page17
9.2 Setting the water softening system
Set the water hardness on your appliance.
1. Determine the water hardness and the appropriate
setting value.
→
"Overview of water hardness settings", Page16
2. Press .
3. To open the basic settings, press for approx.
3seconds.
4. Press repeatedly until the display shows "Water
hardness".
5. Press or repeatedly until the right water hardness
has been set.
The value 0 - 8 is set at the factory.
6. To save the settings, press for approx. 3seconds.
Loading ...
Loading ...
Loading ...