Loading ...
Loading ...
Loading ...
72
3.7.5 User
Note:
1. If the NVR firmware version out of the factory is xx.7.0.6 or above, the default user name is
“admin” and the default password is “ms1234”;
2. If the NVR firmware is upgraded to xx.7.0.6 or above from a lower version, the default password
will turn to “ms1234” after a reset, or it will keep the old default password “123456”;
3. If the NVR firmware version is below xx.7.0.6, the default user name is “admin” and the default
password is “123456”.
Add a new user
Click , then input user information and click to add a new user.
Note: The user name can only contain letters and number. There are two user levels with different
authority: Operator and Viewer.
Loading ...
Loading ...
Loading ...