Loading ...
Loading ...
Loading ...
17
3.Local Operation
3.1 Wizard Setting
By default, the Setup Wizard will start once the NVR has been loaded. You can click check-box to turn
off the Wizard when startup.
The Setup Wizard will guide you to complete important settings, which makes NVR more user-friendly.
Step1. Input the user name, password and select system language.
Input new password to modify password .
Note: It is recommended to change the initial password for the safety of your equipment.
Note:
1. If the NVR firmware version out of the factory is xx.7.0.6 or above, the default user name is
“admin” and the default password is “ms1234”;
2. If the NVR firmware is upgraded to xx.7.0.6 or above from a lower version, the default
password will turn to “ms1234” after a reset, or it will keep the old default password
“123456”;
3. If the NVR firmware version is below xx.7.0.6, the default user name is “admin” and the
default password is “123456”.
Loading ...
Loading ...
Loading ...