XQB201 -GOLD6 XQB201 -GREY6
AUTOMATIC
WASHING MACHINE
AXQB201A-GOLD6 AXQB201A-GREY6
Read Before Use
Usage guide
Install guide
Parts and Bom
Notice
Installation
Further Adjustments
Pre-wash
Programming and features
Wash and Spin
Post-wash
Please pay attention to
safety instructions
This product belongs to class I appliance, please pay attention
to electricity safety when using!
SAFETY REQUIREMENTS
Ensure that servicing is done by factory authorized service
personnel, to minimize product damage or safety issues.
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding reduces the risk of
electrical shock by providing an escape wire for the electrical
current.
This appliance has a cord that has a grounding wire with a 3
-prong plug. The power cord must be plugged into an outlet that
is properly grounded.
If the outlet is a 2-prong wall outlet, it must be replaced with a
properly grounded 3-prong wall outlet. The serial rating plate
indicates the voltage and frequency the appliance is designed
for.
Error Digital Display
Information
Error Reason How to fix
E1 – Water Inlet Fault
E2 – Drainage Fault
E3- Top Cover Fault
E4 – Spin Fault
E6 – Water Level Fault
E5 – Water recycle
reminder
Remarks
E7 – Child Protection
Incoming water has taken over 20 minutes to
reach water level.
The Inlet Valve is blocked or obstructed.
The Water supply is cut off or the stopcock is
open.
Check the reason for low water pressure, open
and close the cover 1 time to restart operation.
Remove the blockage from the inlet valve,
once done open and close the cover 1 time to
restart operation.
Turn on the water supply or stopcock , once
done open and close the cover 1 time to
restart operation.
Reposition the drain pipe for a more
smooth water drainage, once done open
and close the cover 1 time to restart
operation.
Remove the blockage from the drain
valve, once done open and close the
cover 1 time to restart operation.
Reposition the clothes in the tub so they
are balanced and level and close the
cover.
Place the washing machine on a level
surface, once done please open and
Place the drain pipe in the water tank,
then open nad close the top cover or
press the "Start/Pause" key to drain the
water.
close the cover.
Unplug the machine, wait 10 seconds
and replug the machine. If issue
continues set water level to normal and
restart the machine.
Ensure that your child is a safe distance
from the machine and close the cover.
If unsolved the problem after use above methods, please contact maintenance dept and processional
maintenance personnel, customer can not assemble or disassemble.
Close the cover.
Water drainage has taken over 5 minutes.
Drain valve blocked, damaged or faulty.
Drain pipe is damaged.
The cover is open during use.
The wahser is going to drain the water,now
you can place the drain pipe in the water tank
to collect the gray/waste water.
Clothes are not level or balanced.
The machine is standing at an incline.
Water level sensor fault.
Water Leakage.
Harness contact is loose.
Airway tube is loose.
Machine is Child locked but the cover has been
opened.
Parts and Bom Read Before Use
Inner case
Impeller
Operation board
Body
Filter
Adjust nut
Back cover
Power cord
Water input
Drain pipe
Handle
Fixed nut
All operation with this Mark must operate
strictly as instruction requirements, or it may
cause machine damage or endanger users' life.
All behavior with this Mark must absolutely
prohibited. or it may cause machine damage or
endanger users' life.
Connect this side to the water
input valve
Connect this side to
the water pipe and
a tap
Connect this side to the
water pipe
Read
Please connect power plug of the machine
to the designed electrical 110V socket
separately.
Don’t place the machine in the bathroom or other
damp place, and do not put the wet clothes on the
operation board. This may let water into the PCB
board which may cause an electrical fire.
Please ensure that the vents at the bottom of the
machine are well ventilated. Take care especially
when placing machine on the carpet.
Don't wash raincoats or waterproof clothing, such
as a bicycle covers etc. This will cause such items
to be damaged.
Don't share a socket with other appliances.
If the power plug is damaged or the socket is loose, please
do not use and have it repaired by a professional.
Do not use water at a temperature of more
than 50 .
When the machine is in normal use, please
keep the machine plugged in. During a power
outages or if the machine is not being
intended for use, it should be unplugged and
the water tap turned off. Please don't unplug
or plug the machine with wet hands.
Do not obstruct the power cord, damaged the power cord, put any items
on top of the power cord or bend the cord to improper angles.
When the power cord or power plug is damaged, it must be repaired by
specialist maintenance. Tampering with the cable will void all guarantees.
Grounding
Post-wash Usage guide
Each month please clean the Impeller filter to ensure the best performance.
During clean up, please unplug the power plug from the socket
This appliance is not intended for use by persons (including children)
whose physical, sensory or mental capabilities may be different or
reduced, or who lack experience or knowledge, unless such persons
receive supervision or training to operate the appliance by a person
responsible for their safety.
Consult a qualified electrician or service agent if the grounding
instructions are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
If the power supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similar qualified person in order to
avoid hazard.
Children should be supervised to ensure that they do not play with the
appliance.
Warning:
Reminder:
Each machine is tested for water intake and drainage
during production. Therefore, there may be water
residues or tracesof water inside the washing tub,
which is a normal phenomenon.
