Loading ...
Loading ...
3
Installation & Set Up
Ring Alarm Range Extender – Basic Setup & Installation
In-app Setup
1. Ensure your Ring Alarm system is disarmed.
2. In the Ring app, tap Set Up a Device and find theRange Extender in the Security Devices menu.
3. Follow the in-app instructions to complete setup. Plug in the Range Extender to trigger setup mode.
a. Tap the button on the front to retry setup mode.
Installation
1. The Range Extender plugs into a standard outlet.
2. Choose a location for installing your Range Extender. For best coverage, install the Range Extender
in an outlet between the Base Station and end devices which may require the use of the Range
Extender to improve their ability to communicate with the Base Station.
Note
This product can be operated in any Z-Wave network with other Z-Wave certified devices from other
manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor
to increase reliability of the network.
This is a SmartStart enabled product which can be added into a Z-Wave network by scanning the
Z-Wave QR Code present on the product with a controller providing SmartStart inclusion. No further
action is required and the SmartStart product will be added automatically within 10 minutes of being
switched on in the network vicinity. This product can also be operated in any Z-Wave network with other
Z-Wave certified devices from other manufacturers.
Z-Wave Instructions
Z-Wave Device Type: Repeater
Role Type: Always On Slave (AOS)
GENERIC_TYPE_REPEATER_SLAVE (0x0F)
SPECIFIC_TYPE_REPEATER_SLAVE (0x01)
Loading ...
Loading ...
Loading ...