Hikvision DS-2TD1217T-2/PA User Manual

Loading ...

8.1.2 Expert Mode

You can congure the moon detecon parameters of day/night switch according to the actual

needs.

Steps

Select expert mode in

Conguraon.

Set parameters of expert mode.

Day/Night Switch

OFF: Day/Night switch is disabled.

Day/Night Auto-Switch: The system switches day/night mode

automacally according to

environment. It displays colored image at day and black and white image at night.

Day/Night Scheduled-Switch: The system switches day/night mode according to the schedule.

It switches to day mode during the set periods and switches to night mode during the other

periods.

Note

This funcon is not supported in the expert mode of thermal channel.

Sensivity

The higher the value of sensivity is, the more sensive the moon detecon is. If the

sensivity is set to 0, moon detecon and dynamic analysis do not take eect.

Select an Area and click Draw Area. Click and drag the mouse on the live video, then release the

mouse to nish drawing one area.

Stop Drawing

Finish drawing one area.

Clear All Delete all the areas.

Oponal: Repeat the above steps to set mulple areas.

8.2 Set Video Tampering Alarm

When the congured area is covered and cannot be monitored normally, the alarm is triggered and

the device takes certain alarm response acons.

Steps

Go to Conguraon → Event → Basic Event → Video Tampering .

Select the channel number.

Check Enable.

Set the

Sensivity. The higher the value is, the easier to detect the area covering.

Click Draw Area and drag the mouse in the live view to draw the area.

Stop Drawing

Finish drawing.

Thermal Opcal Bi-spectrum Network Camera User Manual

Loading ...

Hikvision DS-2TD1217T-2/PA Thermographic Thermal & Optical Bi-spectrum Network Turret Camera