Hikvision DS-2TD1217T-2/PA User Manual

Loading ...

Pre-Alarm Output and Alarm Output

Check Pre-Alarm Output and Alarm Output to link the pre-alarm or alarm with the

connected alarm device.

Temperature Sudden Change Alarm

When the temperature change exceeds the set sudden change alarm value within the set

cycle, the camera triggers an alarm.

Note

Temperature sudden change alarm is only supported by certain device models.

Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for

seng linkage method.

Oponal: Set the osite pre-alarm/alarm specially during o-hours when there are less causes

of false alarms. You can set the lower alarm threshold to improve the eciency of quick alarm.

Note

The funcon varies according to dierent camera models.

1) Check Enable Osite.

2) Set the

osite pre-alarm/alarm and follow step 4~5 to adjust the pre-alarm/alarm threshold

and arming schedule during working hours.

Note

The same parameters and linkage method apply to the two kinds of pre-alarm/alarm, only the

threshold and arming schedule vary.

Osite Pre-Alarm Threshold

When the temperature of target exceeds the Osite Pre-Alarm Threshold during the

Osite Arming Schedule, and this status lasts not shorter than the Filtering Time, the pre-

alarm is triggered.

Osite Alarm Threshold

When the temperature of target exceeds the Osite Alarm Threshold during the Osite

Arming Schedule, and this status lasts not shorter than the Filtering Time, the alarm is

triggered.

Osite Arming Schedule

Click and drag the me bar to select the arming o-hours for osite pre-alarm and alarm.

Click Save.

The maximum and minimum temperature will be displayed on the live view.

Note

Go to Image → VCA Rules Display to adjust the fonts size and the temperature colour of normal,

alarm and pre-alarm.

Thermal Opcal Bi-spectrum Network Camera User Manual

Loading ...

Hikvision DS-2TD1217T-2/PA Thermographic Thermal & Optical Bi-spectrum Network Turret Camera