Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/84983640-ds-2td1217t-2-pa/bg43.png)
Note
The same parameters and linkage method apply to the two kinds of pre-alarm/alarm, only the
threshold temperature and arming schedule vary.
Osite Pre-Alarm Temperature
When the temperature of target exceeds the Osite Pre-Alarm Temperature during the
Osite Arming Schedule, and this status lasts not shorter than the Filtering Time, the pre-
alarm is triggered.
Osite Alarm Temperature
When the temperature of target exceeds the Osite Alarm Temperature during the Osite
Arming Schedule, and this status lasts not shorter than the Filtering Time, the alarm is
triggered.
Osite Arming Schedule
Click and drag the me bar to select the arming o-hours for osite pre-alarm and alarm.
8.
Click Save.
Click Live View, and select thermal channel to view the temperature and rules
informaon on
live view.
Point Thermography
Congure the temperature measurement rule and click any point in live view to monitor the
temperature.
Steps
1.
Click in the live view and a cross cursor showed on the interface.
2.
Drag the cross cursor to desired
posion.
Go to Live View interface to view the temperature and rule of the point in thermal channel.
Line Thermography
Congure the temperature measurement rule and monitor the maximum temperature of the line.
Steps
1.
Click and drag the mouse to draw a line in the live view interface.
2.
Click and move the line to adjust the
posion.
3.
Click and drag the ends of the line to adjust the length.
Go to Live View interface to view the maximum temperature and rule of the line in thermal
channel.
Thermal Opcal Bi-spectrum Network Camera User Manual
52
Loading ...
Loading ...
Loading ...