Hikvision DS-2TD1217T-2/PA User Manual

Loading ...

Check Display Shield Area to show the shield area on the live view.

Click Add to save the re detecon shield, and it will be listed in the list. You can select a region

and click Delete to delete it from the list. You can also enable the region or not.

Click Save.

7.3 Perimeter Protecon

The funcon is used to detect whether there is any target breaking the perimeter protecon rules.

The opcal camera will track the target and the device will alarm when the perimeter protecon

rule is triggered.

7.3.1 Set Perimeter

Protecon Rules

The device can detect whether there is any target breaking the perimeter protecon rules. The

device will alarm when the rule is triggered.

Before You Start

Go to Conguraon → System → Maintenance → VCA Resource Type , select Temperature

Measurement + Perimeter

Protecon.

Steps

Go to Conguraon → Perimeter Protecon → Rule .

Check Intelligent Analysis.

Oponal: Check Enable Fusion to view opcal and thermal image.

Set perimeter protecon rules.

1) Click to add a new rule.

2) Enter the rule name, and click the drop down menu to select Rule Type.

Line Crossing

If any target moves across the

seng line, the alarm will be triggered. You can set the

crossing

direcon.

Intrusion

If any target intrudes into the pre-dened region longer than the set duraon, the alarm

will be triggered.

Region Entrance

If any target enters the pre-dened region, the alarm will be triggered.

Region Exing

If any target exits the pre-dened region, the alarm will be triggered.

3) Draw the

detecon rule.

Thermal Opcal Bi-spectrum Network Camera User Manual

Loading ...

Hikvision DS-2TD1217T-2/PA Thermographic Thermal & Optical Bi-spectrum Network Turret Camera