Loading ...
Loading ...
Loading ...
9
Pan and Tilt Channels
Because not all intelligent lighting xtures are alike or share the same control
attributes, the controller allows the user to assign the wheel the correct pan and
tilt channel for every individual xture. All pan/tilt settings can be reassigned to
output on a different DMX channel. Press AUTO/DEL buttons to delete the chan-
nel assignments.
1. Press the desired chase button then press PROGRAM and TAPSYNC/DISPLAY
buttons to choose a DMX channel.
2. Press a SCANNER button or PAGE SELECT button that represents the xture
whose faders you would like to reassign.
3. Move one of the faders to select the pan channel.
4. Press the TAPSYNC/DISPLAY button to select pan/tilt.
5. Move one of the faders to select the tilt channel.
6. Press and hold PROGRAM and TAPSYNC/DISPLAY buttons to exit and save
settings. All LEDs will blink indicating completion of the operation.
Resetting the System
Assigning Fade Time
To reset the controller to its factory defaults follow the steps below.
1. Turn off the unit.
2. Press and hold the BANK UP and AUTO/DEL buttons while simultaneously
turning on the unit.
You can choose the board’s fade time during scene execution is implemented
broadly to all output channels or only to the pan/tilt movement channels. This is
relevant because often you will want gobos and colors to change quickly while
not affecting the movement of the light.
1. Turn off the unit.
2. Hold the BLACKOUT and TAPSYNC/DISPLAY buttons simultaneously.
3. Turn on the controller.
4. Press the TAPSYNC/DISPLAY button to toggle between the two modes (all
channels or pan/tilt only).
5. Press BLACKOUT and TAPSYNC/DISPLAY buttons to save settings. All LEDs
will blink indicating completion of the operation.
Programming Scenes
There are a total of 30 scene banks, each containing 8 scenes which are pro-
grammable. Only one bank may be selected at any time. Press and hold PRO-
GRAM button for 3 second to activate program mode. The display PROGRAM
indicator will continuously ash while in program mode. Please note that all
scene record, edit, delete, and copy functions are done in the program mode.
Loading ...
Loading ...
Loading ...