Loading ...
Loading ...
Loading ...
INTRODUCTION | 9
INTRODUCTION
INTRODUCTION
4. Max Cool
The Max Cool feature
assists with periods of high
refrigerator use, full grocery
loads, or temporarily warm
room temperatures. Press MAX COOL to
activate Max Cool. After the Max Cool cycle
completes, the refrigerator will return to its
previous setting.
5. Connect
Wi-Fi connectivity allows your
Smart Refrigerator to connect
to the Internet and interact
with the JennAir
®
App from
your smartphone or mobile device. See the
“Automatic Setup—Wi-Fi Protected Setup
(WPS)” section for more information.
Sabbath
Allows the door of the
refrigerator to be opened or
closed during the Sabbath
or other religious holidays
without activating the interior lights or
controls. Press and hold Sabbath for
3 seconds to activate Sabbath mode.
Lock
The control panel can be
locked for easy cleaning or
to avoid unintentional mode
changes.
6. Power Outage
The Power Outage indicator
lets you know if the power
supply to the refrigerator has
been off and the temperature has risen.
Over temp Alarm
Helps avoid food spoilage
and high energy costs by
sounding an alert when
refrigerator temperatures remain at
unusually high levels.
Door Open
The Door Open alarm feature
sounds an alarm when the
refrigerator door(s) or freezer
door is open for 5 minutes
and cooling is turned on. The alarm will
repeat every 2 minutes. Close the door to
turn the alarm and “Door Open” alert off. To
stop the alarm noise with the door open,
press any key.
7. Showroom
This mode is used when the
refrigerator is on display in a
retail store or if you want to
turn the cooling off and
deactivate all other functions except interior
lighting.
To activate showroom mode, press
and hold top and bottom zone
icons simultaneously for 3 seconds.
To deactivate the showroom mode,
press and hold top and bottom
zone icons simultaneously for
3 seconds.
8. Filter Reset
Displays the status of the
water filter. To reset the
filter, press and hold FILTER
RESET for 3 seconds. After
countdown, the “Replace Filter” indicator
will turn off.
Replace Filter
Replace the water filter.
While you are dispensing
water, the “Replace Filter”
icon will flash constantly
from beginning to the end of dispensing.
After 14 days without replacing the water
filter, the “Replace Filter” icon will blink
seven times and an alert tone will sound
three times at the end of dispensing. See
the “Water Filtration System” section.
NOTE: “Replace Filter” will remain
illuminated if a filter reset is not completed.
Order Filter
Order a replacement water
filter.
Loading ...
Loading ...
Loading ...