Loading ...
Loading ...
Loading ...
Electrical
Your range
must
be electrically
grounded
in
a
c
c
o
rdance with
local codes or, in the absence of local
codes, in accordance with the National Electrical Code (ANSI/NFPA 70, latest edition). In Canada,
electrical grounding must be in accordance with the current CSA C22.1 Canadian Electrical Code
Part 1 and/or local codes.
The power supply must be the correct polarity. Reverse polarity will result in continuous sparking of
the electrodes, even after flame ignition. If there is any doubt as to whether the power supply has
the correct polarity or grounded, have it checked by a qualified electrician.
14
ELECTRICAL REQUIREMENTS
Electrical Supply
Service
Grounded, 110/120 VAC, 60 Hz
15 amp or 20 amp dedicated circuit
Receptacle 3-prong grounding-type
Power Cord 5' (1.3 m)
Oven Racks Installation
Installation Hang the rack to the side rails and push in slowly
Disassemble
Lift the rack up and pull out slowly until free of the side rails.
Cooktop Burner Grates Installation
Remove the packing materials from the cooktop burner
grates. Place the burner grates to the right position. Pay
attention to the middle right grates as illustrated, as the
thicker side should be in the left.
Put the griddle (only for FFSGS6460-48)
and the wok support to the burner(s) you like
to cook.
48"
Loading ...
Loading ...
Loading ...