Shure MV7+ User Manual

Loading ...

Shure Incorporated

14/17

◦

Overall Dimensions

MV7+ Yoke Assembly

TheMV7+yokeallowsapodcastertobeflexiblewithmicplacement.Loosentheyokeknobsandyoucanadjustthemicro

phoneinavarietyangles.Ifthemicrophonebecomesdetachedfromtheyoke,thesearethestepstoputittogetherinthecor

rectordertoensurethatyourmicrophoneissecure.Eachsideusesonethingrayspringwasher,oneshinysilverbrasswash

er, two black plastic washers and the yoke and threaded yoke knob.

Start with the threaded knob flat side down on your tabletop.

Stack the washers on the threaded knob.

Place a black plastic washer on the knob.

Place one side of the yoke on next.

Then put the second black plastic washer on.

Place the flat silver washer and then the thin spring washer on the threaded knob.

Using your finger to hold the screw assembly in place, slide the MV7+ onto the threaded screw and turn the

knob to keep washers in place.

Note: Be sure to keep this side on but loose so that you have room to easily move the yoke and assemble the washers

on the opposite side.

On the opposite yoke arm, place the washers into the side of the MV7+ in reverse order. Thin spring washer >

Flat silver washer > Black plastic washer > Yoke arm

Loading ...

Shure MV7+ Podcast Microphone