OWON SDS1202 oscilloscope

Owon SDS1000 series manual - Page 47

For SDS1202.

PDF File Manual, 67 pages, Read Online | Download pdf file

SDS1202 photo
Loading ...
Loading ...
Loading ...
4.Advanced User Guidebook
42
Area : The area of the whole waveform within the screen and the unit is
voltage-second. The area measured above the zero reference (namely the vertical
offset) is positive; the area measured below the zero reference is negative. The area
measured is the algebraic sum of the area of the whole waveform within the screen.
Cycle Area : The area of the first period of waveform on the screen and the
unit is voltage-second. The area above the zero reference (namely the vertical offset)
is positive and the area below the zero reference is negative. The area measured is the
algebraic sum of the area of the whole period waveform.
Note: When the waveform on the screen is less than a period, the period area
measured is 0.
How to Measure with Cursors
Push the Cursor button to turn cursors on and display the cursor menu. Push it again to
turn cursors off.
The Cursor Measurement for normal mode:
The description of the cursor menu is shown as the following table:
Function
Menu
Setting Description
Type
Voltage
Time
Time&Voltage
AutoCursr
Display the voltage measurement cursor and menu.
Display the time measurement cursor and menu.
Display the time and voltage measurement cursor
and menu.
The horizontal cursors are set as the intersections of
the vertical cursors and the waveform
Line Type
(Time&Vol
tage type)
Time
Voltage
Makes the vertical cursors active.
Makes the horizontal cursors active.
Window
(Wave
zoom
mode)
Main
Extension
Measure in the main window.
Measure in the extension window.
Line
a
b
ab
Turn the M knob to move line a.
Turn the M knob to move line b.
Two cursors are linked. Turn the M knob to move
the pair of cursors.
Source
CH1
CH2
Display the channel to which the cursor
measurement will be applied.
Perform the following operation steps for the time and voltage cursor measurement of
the channel CH1:
1. Push Cursor to display the cursor menu.
2. In the right menu, select Source as CH1.
3. Press the first menu item in the right menu, select Time&Voltage for Type, two
blue dotted lines displayed along the horizontal direction of the screen, two blue
Loading ...
Loading ...
Loading ...