Loading ...
Loading ...
Loading ...
● Lower machine onto jack stands or other stable supports
and block wheels before servicing.
NOTE: Remove any material collection system attachments before
lifting the machine.
GXT002211—UN—09JUN15
2. Safely lift rear of the machine frame points (A). Place jack stands or
other stable supports onto transaxle locations (B).
MX101505—UN—11MAY20
3. Safely lift front of the machine at the machine frame point (C). Place
jack stands or other stable supports onto the machine frame
locations (D).
4. If only lifting front of machine, block rear wheels remaining on
ground to avoid movement of the machine.
5. To lower the machine, lift front and/or rear of machine, and remove
jack stands or supports. Lower the machine.
SB31882,000040B-19-11MAY20
Checking ROPS Hardware
1. Park machine safely. (See Parking Safely in the Safety section.)
NOTE: When tightening ROPS hardware, tighten the nut side and not
the bolt head side.
MX101397—UN—11JUN20
2. Tighten two nuts (A) on each side of ROPS to specication.
Specication
ROPS Flange Nut (A)—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51.5 ±10 N·m
(38 ±7 lb·ft)
MX101525—UN—11JUN20
3. Tighten one screw (B) on each side of ROPS to specication.
Specication
ROPS Cap Screw (B)—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 ±25 N·m
(100 ±18 lb·ft)
4. Tighten two nuts (C) on each side of ROPS to specication.
Specication
ROPS Flange Nut (C)—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 51.5 ±10 N·m
(38 ±7 lb·ft)
MX101526—UN—11JUN20
5. Tighten one nut (D) on each side of ROPS to specication.
Specication
ROPS Flange Nut (D)—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 ±25 N·m
(100 ±18 lb·ft)
6. Tighten one nut (E) on each side of ROPS to specication.
Service Miscellaneous
52
Loading ...
Loading ...
Loading ...