Loading ...
Loading ...
Loading ...
● ACEA Oil Sequence A5/B5
● ACEA Oil Sequence C5
● ACEA Oil Sequence C4
● ACEA Oil Sequence C3
● ACEA Oil Sequence C2
● ACEA Oil Sequence C1
DX,ENOIL2-19-15JUL20
Checking Engine Oil Level
IMPORTANT: Avoid damage! Failure to check the oil level
regularly could lead to engine problems if oil level is out of
the operating range:
• Check oil level before operating.
• Check oil level when the engine is cold and not running.
• Keep oil level between the dipstick marks.
• Shut o engine before adding oil.
NOTE: Check oil twice a day if you run engine over 4 hours in a day.
Make sure that engine is cold when checking engine oil level.
Z515E
1. Park machine safely. (See Parking Safely in the Safety section.)
IMPORTANT: Avoid damage! Dirt and contamination can enter
engine when checking oil level. Clean area around dipstick
before loosening or removing.
2. Clean area around the dipstick to prevent debris from falling into
crankcase.
MX101643—UN—02SEP20
Z515E Shown
3. To check oil level on dipstick:
a. Remove dipstick (A). Wipe with clean cloth.
b. Install and tighten the dipstick.
c. Remove dipstick.
d. Check oil level on dipstick. Oil must be between ADD and
FULL marks.
4. If oil level is low, add oil to bring oil level no higher than FULL mark
on dipstick. Do not overll.
5. Install and tighten the dipstick.
Z530M, Z530R, and Z545R
1. Park machine safely. (See Parking Safely in the Safety section.)
IMPORTANT: Avoid damage! Dirt and contamination can enter
engine when checking oil level. Clean area around dipstick
before loosening or removing.
2. Clean area around the dipstick to prevent debris from falling into
crankcase.
MX101426—UN—22APR20
Model Z530 shown. Z545 is similar.
3. To check oil level on dipstick:
a. Remove dipstick (A). Wipe with clean cloth.
b. Insert the dipstick fully in tube, but do not tighten.
c. Remove dipstick.
d. Check oil level on dipstick. Oil must be between ADD and
FULL marks.
4. If oil level is low, add oil to bring oil level no higher than FULL mark
on dipstick. Do not overll.
5. Install and tighten the dipstick.
SB31882,00003ED-19-26AUG20
Changing Engine Oil and Filter
IMPORTANT: Avoid damage! Operating in extreme conditions
require more frequent service intervals:
• Engine components become dirty or plugged when
operating in extreme heat, dust, or other severe conditions.
• Engine oil can degrade if machine is operated constantly
at slow or low engine speeds or for frequent short periods
of time.
Z515E
1. Run engine to warm oil.
2. Park machine safely on a level surface. (See Parking Safely in the
Safety section.)
IMPORTANT: Avoid damage! Dirt and contamination can enter
engine when checking oil level. Clean area around dipstick
before loosening or removing.
Service Engine
32
Loading ...
Loading ...
Loading ...