Loading ...
Loading ...
Loading ...
104
4.10 System
This section allows you to create user accounts, set the camera time, and update the
firmware.
4.10.1 Time
You can use the following methods to adjust the system time of your camera.
Figure 4-77
To manually set a time or synchronize with the computer time:
1. Enable Time Sync (For GV-SD2322-IR Only)
2. Select a Sync Mode.
Sync with System Configuration: Select a Time Zone, manually set a time by
clicking on the System Time, or synchronize with the computer time.
Sync with NTP Server: To synchronize with a network time server, type the IP
address of the network time server next to NTP Server Address and specify the
Update Interval.
Sync with Management Server (ONVIF): The device time is synchronized with
Management Server (ONVIF).
Sync with Latest Server Time: The device time is synchronized with the latest
updated time, either on ONVIF or the Web interface.
3. Select a Time Zone.
4. Next to System Time, manually set the camera’s time or click Sync with Computer
Time to synchronize with the time of your PC.
5. Click Save.
To synchronize with a network time server (For GV-SD2722-IR / SD3732-IR only):
Loading ...
Loading ...
Loading ...