Loading ...
Loading ...
Loading ...
Operations
English64
Delay End
You can set the washer to finish your wash automatically at a later time, choosing a delay of between 1 to 24
hours (in 1 hour increments). The hour displayed indicates the time the wash will finish.
1. Tap WASHER.
2. Select a cycle and change the cycle settings as necessary.
3. Tap Options.
4. Turn the Navigation dial to select Delay End, and then tap OK.
5. Turn the Navigation dial to select the desired time, and then tap OK.
6. Touch and hold .
- Status shows on the display and the washer tumbles the drum to sense the weight of the load (if
load sensing is preset for the selected cycle). When load sensing is complete, the display shows the
remaining time until the end of the wash cycle.
- To cancel Delay End, tap to restart the washer.
Drum Light
This turns on the light inside the drum so you can check the status of the items inside.
1. Tap WASHER, and then tap Options.
2. Turn the Navigation dial to select Drum Light, and then tap OK.
- Even if the washer is turned off, the drum light will turn on as long as the power cable is connected.
- Once the Drum Light function is enabled, the drum light will turn off automatically after 2 minutes.
- Opening the washer door automatically turns on the drum light. The light will then turn off
automatically after 2 minutes.
- Water droplets on the surface of the drum light can scatter light such that it resembles a yellow
stain. This is merely an optical illusion and not a malfunction.
Untitled-2 64 2024-01-03 11:07:35
Loading ...
Loading ...
Loading ...