Loading ...
Loading ...
Loading ...
ADVANCED CONFIGURATION
151
6. Toggle Noise Rejection On or Off
from the Coupling side menu.
Range
On, Off
7. Press Trigger When from the lower
menu.
Then use the side menu to select trigger
conditions.
Condition
Stays High, Stays Low, Either
8. Press Level from the lower bezel to
set the trigger level.
9. Set the level using the side menu.
Analog
channel
Range
00.0V~ 5 screen divisions
Set to TTL 1.4V
Set to ECL -1.3V
Set to 50%
10. Press Timer from the lower bezel to
set the timer time.
Range
4ns~10.0S
Using the Bus Trigger
The Bus trigger is used to trigger the oscilloscope on UART, I2C,
CAN or LIN serial bus signals or on bus data.
Loading ...
Loading ...
Loading ...