Loading ...
Loading ...
Loading ...
READ ALL INSTRUCTIONS BEFORE USE
Use proper assembly technique when installing bolts,
start all bolts first and then tighten appropriately.
Remove the grill and hopper contents for assembly.
LEG ASSEMBLY
Ensure the lids are latched shut and tilt the grill back. Be
careful not to scratch the grill or the surface the grill is
sitting on. Use the provided screws, lock washers, and flat
washers to attach both legs to the bottom of the unit as
shown.
Note: Use the four rubber leg levelers to level the grill.
Make sure the grill is always sitting level or is slightly
tilted towards the drip pan.
HANDLE ASSEMBLY
The screws and washers that are required to attach the
handle to the grill are already in the handle. Remove the
screws and washers and attach the handle to the grill as
shown.
DRIP PAN
Slide the grease pan onto the holes on the left-hand side
of the grill. Once it is in position slide the drip pan down
diagonally to the left to secure it to the grill.
INITIAL FIRING SYSTEM CHECK
IMPORTANT:
DO NOT PUT ANY PELLETS INTO THE HOPPER
OR GRILL DURING THE INITIAL FIRING SYSTEM
CHECK.
• Open the pellet hopper lid to check for foreign objects
in the hopper.
ASSEMBLY INSTRUCTIONS
© 2021 United States Stove Company
5
Loading ...
Loading ...
Loading ...