Husqvarna 970701205 330iKP 40-volt 10-in 4-Amp 4 Ah Battery Pole Saw Battery and Charger

Operating Manual - Page 28

For 970701205.

PDF File Manual, 100 pages, Read Online | Download pdf file

970701205 photo
Loading ...
Loading ...
Loading ...
Battery
Condition Possible faults Possible procedure
The battery warning
LED flashes.
Temperature deviation,
the battery is too cold or
too hot to use.
Let the battery cool down or move it in-
doors to warm it up. When the battery has
the correct temperature, it can be used
again. Use the battery in ambient temper-
atures between 14°F (-10°C) and 104°F
(40°C).
The battery is empty. Charge the battery.
The battery warning
LED comes on.
Permanent battery er-
ror.
Speak to your dealer.
Battery charger
Condition Possible faults Possible procedure
The charging LED is
red.
Permanent battery
charger error.
Speak to your dealer.
The charging LED
flashes red. Temperature deviation,
the battery is too cold
or too hot to use or
charge.
Let the battery cool down or warm it up.
When the battery has the correct temper-
ature, it can be used or charged again.
Use the battery charger in ambient temper-
atures specified in
Technical data on page
29
.
The charging LED
flashes green.
The charging LED
flashes red.
Faulty battery. Speak to your dealer.
Transportation, storage and disposal
Transportation and storage
Note: Variations in temperature can lead
to pressure in the oil tank with temporary
oil leakage as a result. Follow the storage
instructions.
Clean the product and empty the oil tank
before you put the product in storage.
Put the product in a horizontal position
or hung with the bar pointed down during
storage.
Do not put the product with the bar pointed
up during storage.
The supplied Li-ion batteries obey
the Dangerous Goods Legislation
requirements.
Obey the special requirement on package
and labels for commercial transportation,
including by third parties and forwarding
agents.
Speak to a person with special training
in dangerous material before you send
the product. Obey all applicable national
regulations.
Use tape on open contacts when you put
the battery in a package. Put the battery in
the package tightly to prevent movement.
Remove the battery for storage or
transportation.
28 2113 - 004 - 03.11.2023
Loading ...
Loading ...
Loading ...