Loading ...
Loading ...
Loading ...
EN
20
Operation
www.bora.com
6 Operation
Observe all safety and warning information during
operation (see the Safety chapter).
INFO The cooktop may only be operated when the
stainless steel grease filter of the cooktop
extractor is installed (see operating instructions
for cooktop extractor).
INFO
Clean the cooking zone before using the cooktop
for the first time (see the Cleaning chapter).
6.1 Switching cooktop on/off
Switching on
Press to switch on the cooktop. The power level
0
is displayed in the cooking zone indicators.
If no power level is set after switching on the appliance,
the cooktop will turn off after a few seconds.
Switching off
INFO Use the operating panel to switch off the
cooking zone after use. Do not rely on the pan
detector.
Press to switch off the cooktop.
Pay attention to the residual heat display
(see the Device Description chapter).
6.1.1 Switching on the cooking zone
Press the button for the desired cooking zone. The
0
in the cooking zone indicator lights up more brightly.
The cooking zone indicator light illuminates.
6.1.2 Adjusting the power level
Press to set power level
5
to set power level
9
.
6.1.3 Changing the power level
Press or until the required power level is shown
in the cooking zone indicator.
6.1.4 Switching on the power setting
INFO Both cooking zones are equipped with a power-
enhancing power setting.
If a cooking zone is operated at power setting
P
, the other
cooking zones can be operated at a maximum power level
of
5
.
If the power setting is increased to
5
, the power level will
switch back to
P
.
Continue pressing until power setting
P
is
displayed in the cooking zone indicator.
After 10 minutes, the cooking zone is automatically
switched back to power level
9
.
6.1.5 Switching the power setting off early
Continue pressing until the lower power level that
you want is displayed.
6.1.6 Switching off the cooking zone
INFO If a cooking zone indicator shows
H
,
the cooking zone is still hot.
Continue pressing or until the cooking zone
indicator displays power level
0
. The display will show
a
0
for a few seconds.
Press and simultaneously.
6.1.7 Pause function
INFO The pause function switches off automatically
after 10 minutes.
Press the pause button on the cooktop to briefly
interrupt the cooking session.
I I
is displayed in the cooking zone indicator.
Press the pause button again followed by or
to end the pause function.
By pressing the button when the pause function is
active, the previous setting can be activated again within
6 seconds.
To do so, press the button and then .
Loading ...
Loading ...
Loading ...