Loading ...
Loading ...
Loading ...
English 5
Installation Requirements
Mounting Height
CAUTION
• Be sure to check the mounting height before installing the product.
• The mounting height is measured from the top of the range to the upper
cabinets. The mounting height for an electric cooking surface is measured from
its glass cooktop as shown in the image on the left. For a gas cooking surface,
the mounting height is measured from the top of the burning grates as shown in
the image on the right.
Min 24 " (61 cm)
Max 36 " (91.4 cm)
Min 24" (61 cm)
Max 36" (91.4 cm)
Min 27 " (68.5 cm)
Max 36 " (91.4 cm)
Min 27" (68.5 cm)
Max 36" (91.4 cm)
ELECTRIC RANGES GAS RANGES
Venting Methods
Smoke is exhausted to the outside through a special pipe connected to the hood.
(Recirculating)
Wall Venting
Roof Venting
B
A
A. Deflector
B. 6" (15.2 cm)
A. Wall cap
B. 6" (15.2 cm)
A. Roof cap
B. 6" (15.2 cm)
B
A
B
A
Roof Venting Wall Venting (Recirculating)
A. Roof cap
B. 6" (15.2 cm)
A. Wall cap
B. 6" (15.2 cm)
A. Deflector
B. 6" (15.2 cm)
CAUTION
• The minimum connectable exhaust outlet diameter is 6" (15.2 cm).
• Ensure the exhaust outlet diameter and duct diameter match, and then connect
the duct to the wall outlet.
• If the duct and the wall outlet have different diameters, the suction performance
will decrease while also significantly increasing noise.
The manufacturer is not responsible for any problems caused by this.
• Use the minimum possible length for the duct, and do not significantly alter the
cross-section.
• When connecting the duct, minimize bending. (Max bending angle: 90˚)
• In an environment where installing with an external venting method is possible,
be sure to install only using the external venting method.
MANUAL INSTALL_Range Hood_DG68-01500A.indb 5MANUAL INSTALL_Range Hood_DG68-01500A.indb 5 2023-01-05 오후 3:15:292023-01-05 오후 3:15:29
Loading ...
Loading ...
Loading ...