Loading ...
Loading ...
Loading ...
10 English
Installation
Installation
Installing the Range Hood
10. Fix the hood to the hood mounting
bracket installed on the wall.
11. Fix the duct auxiliary bracket using
two 30 mm screw anchors in the top
left of the duct.
7. Remove the cover by loosening the
screw on the PCB cover.
8. Connect the connector of the electric
damper wire and the PCB connector.
NOTE
Insert the wire into the hole at the top
left corner.
9. Assemble the PCB cover using a
screw.
NOTE
Put the connected connector into the
hole of the cover as shown in the
picture.
MANUAL INSTALL_Range Hood_DG68-01500A.indb 10MANUAL INSTALL_Range Hood_DG68-01500A.indb 10 2023-01-05 오후 3:15:312023-01-05 오후 3:15:31
Loading ...
Loading ...
Loading ...