Loading ...
Loading ...
Loading ...
5 DAILY USE EN
Troubleshooting
Caution! Before troubleshooting, disconnect the power supply. Only a qualified electrician of
competent person must do the troubleshooting that is not in this manual.
Important! There will be some sound/noise during normal operation (compressor or refrigerant
circulation).
Problem
Possible cause
Solution
Appliance does not
work
Mains plug is not plugged in or
is loose
Insert mains plug.
Fuse has blown or is defective
Check fuse, replace if necessary.
Socket is defective
Mains malfunctions are to be corrected
by an electrician.
Appliance freezes
or cools too much
Temperature is set too cold.
Turn the temperature regulator to a
warmer setting temporarily.
The food is not
frozen enough.
Temperature is not properly
adjusted.
Please look in the initial Temperature
Setting section.
Door was open for an extended
period.
Open the door only as long as
necessary.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
Turn the temperature regulation to a
colder setting temporarily.
The appliance is near a heat
source.
Please look in the installation location
section.
Heavy build up of
frost on the door
seal.
Door seal is not air tight.
Carefully warm the leaking sections of
the door seal with a hair dryer (on a
cool setting). At the same time shape
the warmed door seal by hand such that
it sits correctly.
Unusual noises
Appliance is not level.
Re-adjust the feet.
The appliance is touching the
wall or other objects.
Move the appliance slightly.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
If necessary, carefully bend the
component out of the way.
If the malfunction shows again, contact the Service Center.
48
Loading ...