Loading ...
Loading ...
Loading ...
1 SAFETY GUIDELINES EN
good condition and
optimise your energy
consumption by following
the instructions in this
installation and user guide.
INSTALLATION
If your appliance is fitted
with casters, then
remember that they should
only be used for short
movements. Do not move
the appliance over long
distances on its casters.
Clean the appliance
before connecting it to the
mains. Always unplug
your appliance before any
maintenance work. Never
pull on the power cord, but
only on the plug itself.
Install the appliance in a
dry and well ventilated
place.
Avoid balconies,
verandas and patios,
because excessively high
and low temperatures in
the summer and the
winter can prevent your
appliance from
functioning properly, or
even damage it.
Do not place the
appliance near a source
of heat, such as an oven
or a radiator.
Leave at least 3 and 5
cm clear around the sides
and 10 cm above the
appliance to
allow the air to
circulate freely.
Place the appliance at
a suitable distance from
the wall using the
spacers contained in
the bag of accessories.
Your appliance is
designed to function
optimally at a given
ambient temperature. In
this case, it is said to be
designed for a particular
"climate class". The
climate class is shown on
the ID plate inside the
appliance, on the bottom
of the left hand wall.
Beyond these
temperatures, the
performance of your
appliance may suffer.
Class
Ambient
temperature
SN
+ 10°C to + 32°C
N
+ 16°C to + 32°C
ST
+ 16°C to + 38°C
T
+ 16°C to + 43°C
Tips:
Once the appliance is
installed, adjust the feet so
that it is slightly inclined
rearwards. In this way, it will
be easier to close the door.
Before putting any food in
the fridge, clean the
appliance
33
Loading ...
Loading ...
Loading ...