Loading ...
Loading ...
Loading ...
3 INSTALLATION EN
Positioning
Install this appliance at a location where the ambient temperature
corresponds to the climate class indicated on the rating plate of the
appliance:
Climate class
Ambient temperature
SN
+ 10°C to + 32°C
N
+ 16°C to + 32°C
ST
+ 16°C to + 38°C
T
+ 16°C to + 43°C
Location
The appliance should be installed well away from sources of heat such as
radiators, boilers, direct sunlight etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure best performance, if the
appliance is positioned below an overhanging wall unit, the minimum
distance between the top of the cabinet and the wall unit must be at least
100 mm. Ideally, however, the appliance should not be positioned below
overhanging wall units. Accurate leveling is ensured by one or more
adjustable feet at the base of the cabinet.
Warning! It must be possible to disconnect the appliance from the
mains power supply; the plug must therefore be easily accessible after
installation.
Electrical connection
Before plugging ln, ensure that the voltage and frequency shown on the
rating plate correspond to your domestic power supply. The appliance must
be earthed. The power supply cable plug is provided with a contact for this
purpose. If the domestic power supply socket is not earthed, connect the
appliance to a separate earth in compliance with current regulations,
consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions
are not observed.
This appliance complies with the E.E.C. Directives.
41
Loading ...
Loading ...
Loading ...